1
Instruction Manual
for
Ultramax Mini
Item
500-0301
Item
#500-0301, #500-0302
®
Mini
#500-0302 is supplied with
M6 Carbide Tool Holder
3. Foot Switch
3.1 The Foot Switch can be plugged in
➅
any time during the use of the unit.
Keep the Foot Switch depressed to produce output.
3.2 It is suggested to use the Foot Switch in order to avoid heating up the
handpiece when not being used.
4. Other Notes
4.1 It is necessary to turn off the Power
➀
when changing lapping tools or
polishing material. Restarting automatically adjusts the frequency.
4.2 When replacing tool holder or lapping tools use the appropriate changing
tools. The Tool Changing Rack is essential when changing the Ultrasonic
tools. Use of only the wrenches makes it impossible to securely fasten
the tool and also might damage to the wires inside the handpiece!
4.3 Different Ultrasonic polishing materials use different frequencies of
vibration. This requires the unit to be turned off each time you change
material—automatically adjusting the frequency.
4.4 Please avoid impact, submersion, dampening, falling from a height, etc.
All are actions which would void the one-year manufacturer's warranty.
#8914040 / 0319
201 Hancock Ave. Bridgeport, CT 06605, USA
orders 800.243.4466
| 203.366.5400 | fax 203.366.3953
email info@gesswein.com |
www.gesswein.com
