Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-EASIPROX-N Published on 2019.03.26 Page: 1/ 4
EASIPROX Stand Alone Reader
Operation Manual
114
Unit: mm
EASIPROX-ANSI
EASIPROX-980-40
I. Features
1. Memory volume up to 2000 proximity cards/tokens. Reading time approx. 0.5 seconds.
2. Programmable via Master Card.
3. Non-volatile memory protects programmed information in case of power loss.
4. Epoxy sealed. Standard size of single-gang box.
II. Specifications
Operating Voltage
Current Draw
RF Frequency
Read Range
Input
Output
LED Status Indication
(Yellow, Green, Red)
Memory Volume
Format
Relay Rating
Relock Time
Ambient Humidity
Operating Temperature
EMC Specification
III. LED Status Indication
Status / Function
Signal
Mode
Standby
Yellow LED On
Green LED On
Red LED On
Programming
Red LED flash
Yellow & Red LED flash
Yellow LED flash
Green LED quick flash
12 VAC/VDC
Active: 70 mA/12 VDC, Standby: 45 mA/12 VDC
125 KHz (ABA form code)
10~15 cm
1 contact for Request-To-Exit button
1 relay (Dry contacts: N.O./N.C./Com.)
2-LED indicators (Yellow & Green / Red); 3-LED indicators
2000 proximity cards/tokens
EM-400x 64-bit Standard R/O or Compatible
Max. 5A/250 VAC
1~60 seconds
5%~95% (Non-condensing)
-20°C~70°C
CE approval
Yellow & Green LED flash
No Master Card (empty memory)
Standby
Relay activated
Invalid entry
Green LED flash
Enter ADD CARDS mode
Enter DELETE CARDS mode
Enter CLEAR MEMORY mode
Adjust relock time (1~60 flashes, 1~60
seconds)
Clearing memory in progress
