background image

1

www.gigaipc.com

 GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

QBiX-JMB-CFLA310HG-A1

Industrial Falness System with Intel® H310 Chipset, Support for 

Intel® 8th/9th Gen. Core™ i Processor and Discrete GFX support

Startup Manual

Packing List

Before you begin installing your card, please make 
sure that the following items have been shipped:
1. Cable Power #20 350mm (25CRI-350902-H3R)
2. Screw #6-32x4L x 11 (25KS2-13004F-S0R)
3. Terminal Blocks Male Plug (25IO0-2ESDV0-D2R )

Dimension

Specifications

Dimension

System Size : 224W x 343D x 146H(mm) - 
Discrete GFX max 250W support.(optional)

CPU 

Support for 8/9th Generation Intel® Core™ 
i7/i5/i3 IOTG processors in the LGA1151 
package, TDP under 65W

Chipset

Intel® H310 Express Chipset

Memory

2 x DDR4 SO-DIMM sockets supporting up 
to 32 GB,
Dual channel DDR4 2666/2400 MHz

Ethernet

1 x GbE LAN ports (Intel® i219V)
3 x GbE LAN ports (Intel® i211AT)

Graphic 
Support 

Integrated Graphics Processor - Intel® HD 
Graphics support:
1 x DVI-D port, supporting a maximum 
resolution of 1920 x 1080 @60 Hz
1 x D-Sub port, supporting a maximum 
resolution of 1920 x 1200 @60 Hz
1 x DP port, supporting a maximum 
resolution of 4096 x 2160 @30 Hz
2 independent displays output

Audio

Realtek ALC269 with 2W amplifer
High Definition Audio

Storage 

3 x SATA 6 Gb/s port (Support 2.5" HDD/
SSD)

Expansion 
Slots

1 x M.2 Slot 2230 (E-Key For WiFi + BT)
1 x M.2 Slot 2280 (M-Key support SATA)
1 x Mini-PCIe slot ( USB2.0) with 
SIM Slot
1 x PCIe slot - Discrete riser card support

Caution: DANGER OF EXPLOSION IF 
BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE
SAME OR EQUIVALENT TYPE RECOMMENDED
BY THE MANUFACTURER, DISCARD 
USED BATTERIES
ACCORDING TO THE MANUFACTURER’S
INSTRUCTIONS.

Summary of Contents for QBiX-JMB-CFLA310H-A1
















Reviews: