Model # BT015
Cooper 1
5’ W x 5’ L x 36” H
ASSEMBLY INSTRUCTIONS
IMPORTANT
We strongly suggest setting up your new tent
before going camping to insure that all parts are
present and to familiarize yourself with the tents
assembly. This will have a great effect on how
well you enjoy your camping trip.
E
To prolong the life of your tent floor we suggest using a ground cloth cut slightly smaller than the floor of your tent and that you select a
clean level area for your campsite.
Step 1- TENT SET UP
1) Spread the tent body out on the ground.
2) Fully open both of the poles.
3) Carefully thread each pole through the pole sleeves located on top of tent (Figure A).
4) Starting with one pole, insert the pole end into the footing located at bottom corner of tent. Be sure to insert pole end into the opening
closest to tent (Figure B). Bend pole and insert other end into the diagonally opposite corner of tent. Repeat process for other pole. Your
tent should now be erect.
5) Tie the straps onto the poles atop of tent (Figure C).
6) Stake the tent down (Figure D).
Step 2- ATTACHING THE RAIN FLY
1) Drape fly over tent
2) Hook corners of fly to nylon straps on pole sleeves (Figure E).
A
B
D
C
