Please read and retain for future reference.
• Ensure the appliance is in placed on a horizontal, even and stable surface.
• Verify that the mains voltage is the same as that indicated on the rating plate
on the appliance before use.
• Make sure that you always use a grounded wall socket to connect the appliance.
Never use the extention cord as power connection.
• Always remove the plug from the wall socket when the appliance is not in use.
• Remove the plug from the wall socket by pulling the plug, not the power cord.
• Make sure that the appliance, the power cord and plug do not make contact
with water.
• Make sure that the appliance, the power cord and plug do not make contact
with hot surface, such as a hot hob or naked flame.
• Check the appliance’s power cord regularly to make sure it is not damaged.
Do not use the appliance if the power cord is damaged. If the power cord is
damaged, it must be replaced by an electrical technician or a person with
similar qualification, in order to avoid any hazards.
• Never use the appliance in the vicinity of flammable material.
SAFETY INSTRUCTION - GENERAL
SAFETY INSTRUCTION - ELECTRICITY AND HEAT
• Use this appliance solely in accordance with these instructions.
• This appliance is for household use only, not for commercial purpose.
• Remove all packaging material from the appliance before use.
• This appliance shall not be used by children of 0 to 8-year old.
• This appliance can be used by children older than 8-year old and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, but only if they have been given supervision or instruction concerning
use of the appliance in safe way and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and maintenance must not be done by children.
• Have any repairs carried out solely by a qualified electrician. Never try to
repair the appliance yourself.
• Do not handle the plug or appliance with wet hands.
• Do not immerse the main body in water.
• Children shall not play with the appliance.
• Do not leave the appliance unattended when connected to the mains supply.
• Only use the attachments/accessories supplied with the product.
• Do not pick up the appliance if falls into water. Remove the plug from the
socket immediatedly. Do not use the appliance again.
• Never immerse the appliance, the power cord or the plug in water or any
liquid.
• Do not move the appliance while its switched on.
• Please fill the cleaning tank with clean room temperature water before use.
Do not operate the appliance when the cleaning-tank is empty.
• Automatic running time is 5 minutes per cycle.
• Water temperature may rise after operation. It is recommend to change to use
clean room temperature water everytime before use.
• To prolong the service life of the appliance, please DO NOT operate the
appliance continuously for a long time. We suggest after 5 minutes operation,
please at least wait for 15 minutes, let the appliance cool down before
continue using it.
• Do not ever use alcohol, gasoline or flammable solution into cleaning tank to
avoid a fire or explosion.
• Do not use mineral acids, these could damage the tank.
• Clean the appliance thoroughly after use
(please refer to “Cleaning and Maintenance” section).
• Do not get wet on the power cord connector during filling the water and cleaning.
SAFETY INSTRUCTION - DURING OPERATION
MODEL NO.: GUC30BMTS
30W
Eyeglasses
Ultrasonic Cleaner
超聲波眼鏡清洗機
A GILMAN GROUP BRAND
1. Lid
2. Cleaning tank
3. Housing
4. On/ Off button
5. Indicator light
6. Power cord connector
7. Power cord
8. Plastic basket with handle
PRODUCT OVERVIEW
ITEMS NOT SUITABLE FOR ULTRASONIC CLEANING
8
3
4
6
7
5
2
1
Small items accessories - Plastic basket with handle
When small items or accessories to be cleaned. Put the items into plastic basket,
open and then hold the handle and place the basket into the cleaning tank, fill
clean room temperature water to Max. line before operation.
Frictions between the item and the tank can be reduced.
Soft jewelery such as pearls or jewelery or
eyeglasses made of:
- Emerald - Diamond - Wood
- Ivory - Crystal - Natural materials
- Coral - Hawksbill
- Agate - Horn
- Seashells - Leather
These items are too soft and may scratch and
loosen during cleaning.
- Welded or plated metal items.
- Glued items.
It may enlarge gaps of these objects during
cleaning.
This can cause the joints to come apart of
the objects.
- Non water proof watch,
- Watch caliber
Cannot be cleaned inside water to avoid
damage.
APPLICATIONS
CLEANING AND MAINTENANCE
Tips:
Clean the appliance after every operation.
• Unplug and empty the cleaning tank after using, do not keep water in the
cleaning tank after use.
• Wipe the cleaning tank and housing with dry towel before storage.
• Keep the appliance at a cool and dry place.
PRODUCT SPECIFICATIONS
Model no.:
GUC30BMTS
Voltage:
220-240V~
Frequency:
50/60Hz
Power :
30W
Product dimension : 188 (W) x 97 (H) x 85 (D) mm
2
4
3
6
5
6. To stop cleaning during operation, press “ On/ Off” button.
7. When the cleaning process is finished, unplug the power supply.
Open the lid and take out the object. (Pic.5) Empty the cleaning tank
by pouring the water out from the front of the appliance and avoid
getting wet of the power cord connector. (Pic.6)
Note:
Please always fill the cleaning tank with clean room temperature water
before use. Do not operate the appliance when the cleaning-tank is empty.
Note:
Water temperature may rise after operation. It is recommend to change
to use clean room temperature water everytime before use.
Note:
To prolong the service life of the appliance, please DO NOT operate the
appliance continuously for a long time. We suggest after 5 minutes operation, please
at least wait for 15 minutes, let the appliance cool down before continue using it.
Note:
During cleaning, you can hear the “ZIZI” sounds, it means the ultrasonic
cleaning is working.
Pic.1a
Pic.4
Pic.5
Pic.1b
Pic.3
Pic.6
Pic.2
• The list below common items can be cleaned by ultrasonic.
Attentions:
It is recommended to check with the supplier whether the item is
suitable for ultrasonic cleaning before use.
Attentions:
Ultrasonic cleaning may cause damage of coating on the eye-
glasses. Please recommend to check with your eyeglasses service provider
before use this device.
OPERATING INSTRUCTION
1. Open the lid and fill the cleaning tank with clean room temperature water. The
water should cover the article to be cleaned, but do not exceed “Max” mark
line. (350ml) (Pic.1a & 1b)
2. When small items or accessories to be cleaned. Put the items into plastic
basket, open and then hold the handle and place the basket into the cleaning
tank. Frictions between the item and the tank can be redused. (Pic.2)
3. Close the lid and connect the power cord to the power cord connector of the
appliance backside. (Pic.3)
4. Connect power plug to the power supply and press “ On/ Off” button to start
cleaning. (Pic.4)
5. The blue indication light turns on and it will automatically stop after 5 minutes
with the blue light off.
* The final product specification may be varied according to a different
lot of material and actual input voltage power of the usage area.
