T U N E U P S
W I R E L E S S 1 0 1
Pairing Your S805 and Bluetooth Phone
1.
Turn on the Bluetooth power on your phone.
The Bluetooth power option may be in the
OFF setting by default.
For most Motorola phones:
a (Menu) > Settings > Connection > Bluetooth Link > Setup.
b Scroll to power.
c Select Change.
d Scroll to On.
e Press Select to turn in the Bluetooth function
Bluetooth feature remains on until you turn it off.
Note: For other phones, refer to your phone’s user’s guide.
2.
Put your S805 into pairing mode.
With your S805 off, press and hold the “phone” button
Until it lights up and remains on (about 6 seconds).
3.
Set your phone to look for your S805.
For most Motorola phones:
a (Menu) > Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
b The phone lists all Bluetooth devices it finds.
c Select Motorola S805.
d Press OK and Yes to pair the handsfree device.
e Enter the passkey 0000 and press OK.
Your S805’s ID is now stored in your phone’s memory.
When your S805 is successfully paired with your phone,
The S805 indicator rapidly flashes and then resumes
regular flashing.
For more information visit www.giro.com.
Pairing your Wireless S805 pods
with your naviPlay iPod adapter
You must pair your S805 with your Bluetooth-enabled music
source before you can play music.
Note: To listen with the S805 to music originating from your
Bluetooth-enabled music source, the music source must support
the Advanced Audio Distribution Profile (A2DP).
1. Put your S805 into pairing mode.
With your S805 off, press and hold the “phone” button
Until it lights up and remains on (about 6 seconds).
2. Place the headphones near the naviPlay adapter.
3. Press the power button on the naviPlay Adapter and hold
down for at least 8 seconds, or until the STATUS LED
rapidly blinks alternating amber and green. This initiates
The pairing process on the naviPlay Adapter.
4. When the connection is complete the naviPlay Adapter’s
STATUS LED will blink green slowly. The indicator
Light on the S805 will produce 10 rapid flashes.
Charging the S805’s Internal Battery
First-Time Use: Before you can use your S805, you need to
charge its internal battery for at least three hours.
While charging, both indicator lights will turn on. The S805
cannot be used while charging.
When charging is complete the indicator lights will turn off.
Initial charging should take approximately 3 hours.
1. If necessary, install the
proper country adapter on
the wall charger connector.
2. Plug the charger
into your S805.
Call Controls (Left Side)
naviPlay Controls
Volume Control Wheel
Call Button
Charging Port
Headset Jack
Track Control Wheel
Play/Pause/
Stop Button
Microphone
Music Controls (Right Side)
TuneUps Wireless S805 Controls
Clip Attachment
Charge LED
Status LED
Power
Adapter Base
Battery Pack
iPod
Dock
Connector
Flip Stand
Indicator
Light
Giro Headquarters
380 Encinal Street
Santa Cruz, CA.
95060
Dealer Support
Tel: 800.969.4476
Fax: 800.888.9009
Email: Answer_Desk@bellsports.com
R
id
er L
u
ke
W
yn
en P
h
o
to b
y
T
im Z
im
m
er
m
an
