background image

Specifications

GL-SD60 Outlook

Users’ Manual

GL-SD60

1. The warranty period will last for two years since your purchase of the 

products. If the product fails or malfunctions under the proper installation and 

normal usage within the warranty period, please send it back to our company 

with our RMA approval or contact your local distributors for free repairing 

and/or replacing services.

2. Please do not add/remove any electrical components to/from the products or 

change/tamper the original electrical design without our permission.

3. Please do not add/remove any mechanical components to/from the products 

or change/tamper the original mechanical design without our permission.

4. Please store or use the products in an environment that meets the 

temperature and humidity conditions designated by the product specifications. 

Please do not uncover the GL

-

SD60 series LED products, lest waterproof and 

dustproof become invalid.

5. To avoid any electrical shock or functional damage, please do not insert any 

foreign objects into the products.

6. For further information, please contact us.

CAUTIONS

GL-SD60

12/24V DC 68W  IP66

1. Before installation, please 

turn off the power switch 
for the existing lamp.

4. Please insulate properly the wires/terminals of 

the DC voltage source, screw tightly the 
GL

­

SD60 series LED products onto a wall or a 

stand, and adjust freely the lighting angle in 
accordance with individual needs.

5. Please turn on the DC voltage source to check 

whether the GL

­

SD60 series LED products can work 

normally. If not, please check carefully whether all 
the above installation steps are taken and usage 
conditions are met.

Installation Steps

Optical

Mechanical and Dimension

Electrical

Temperature Condition

Model No.

CCT (Typical) 

GL-SD60-WW

(Warm White)

GL-SD60-CW

(Cool White)

Luminous Flux (lm) 

Typical Luminous Efficacy 

CRI (Ra) 

Beam Angle 

Net. Weight

Cover

3000 K 

6000 K 

2,695 lm

3,795 lm

40 lm / W

56 lm / W

> 80

> 75

30° / 60° (Optional)

Outline Dim. 

405× 305 × 135 (mm)

68 W

3.5 (Kgs)

-20 °C 

 +40 °C

-40 °C 

 +85 °C

Clear

Typical Power consumption 

Input Voltage  

Operating Temperature 

Storage Temperature

11-15V DC / 22-30V DC

2. Please make sure that both the 

DC voltage source and the 
power connector are compatible 
with the GL

­

SD60 series LED 

products. The DC voltage 
source may be provided by an 
AC adapter, a DC battery, and 
so on as long as it meets the 
specifications.

Thank you for choosing the 

GL-SD60 series LED products. 

Please install and use the 

products according to the following 

directions to ensure normal 

functioning and proper operation 

of the products. If not to follow 

these instructions to properly 

install and normally use the 

products, you will not get the 

warranty-committed compensation 

or protection. GlacialLight will not 

take any responsibility for any 

product damage caused by 

improper installation or abnormal 

usage.

3. The GL

­

SD60 series LED products feed only on a 

DC voltage source having an appropriate output 
voltage designated by the product specifications. 
Please connect respectively the Brown (+) and 
Blue (

­

) wires/terminals at the rear side of the 

GL

­

SD60 series LED products to the Positive (+) 

and Negative (

­

) wires/terminals of the DC voltage 

source. It depends on the model in use that the 
Brown (+) and Blue (

­

) wires may be not screwed 

or screwed internally onto a terminal block. 
Misusing an inappropriate voltage source or 
reversing the correct voltage polarity may lead to 
product damage.

(+) Brown

(-) Blue

CAUTION

CLASS 2 LED LIGHT

Do not stare at the beam.

Installation procedure should be undertaken by qualified technical personnel.

Input Current (Max.)

8A at 11V DC / 4A at 22V DC

305 mm

450 mm

135 mm

LED  GL-SP60  IP65

Please be aware of

 the correct DC 

polarity before use.

Reviews: