Flex Link Tri-Port Cable
Quick Start
Global Caché
is lessening our carbon
footprint by reducing our paper
output. For complete documentation
and tutorials, visit:
www.globalcache.com/docs
Getting Started.
Once the iTach Flex is
connected to the network by either an Eth-
ernet cable or WiFi, plug the Flex Link Tri-
port cable into the Flex Link Port.
To configure the Tri-port IR fuctional-
ity, right click on the unit entry in
iHelp*
and click configure. A web browser will
present the web configuration pages of the
Flex. To access the set up pages manually,
type in the unit’s IP address. Flex units in
default will reside at the default address of
http://192.168.1.70
. On the “Flex Link
Port Configuration” page, select “Flex Link
Tri-port Cable” to configure the settings as
desired.
Quickstart_FLCtriport_1up_062713.indd 1
7/1/2013 1:31:56 PM
