1
Expandable Depth Wall Safe
050619
globalindustrial.ca
User's manual
Manual del usuario
Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
Model 493492
CAUTION
Before the safe is installed, change the locks combination
to a number sequence other than the factory preset code
of 1-5-9 to ensure security. Do not keep the keys in
the wall safe.
Opening The Safe For The First Time
Use the override/emergency key to open the safe.
1. Remove the round plastic cap on the panel to locate
the key lock.
2. Insert the key and turn counterclockwise.
3. Pull the handle and open the safe.
Installing or Changing Batteries
1. Open the safe to locate the battery compartment.
2. Remove the battery box cover.
3. Insert 4 new AA batteries (not included).
4. Replace battery box cover.
5. Test the code before locking the safe door.
Low Battery Warning:
If the batteries are low, a red light
will appear when the keypad is pressed. If the batteries are
drained, open the safe using the override/emergency key.
Programing The Digital Combination Lock
Changing the 1st user code (code length:1-8 digit code)
1. Enter the factory preset code: 1+5+9+B on the keypad.
2. Open the door by pulling the chrome handle.
3. Press the reset button on the inside of the door (near
the door hinges). There will be a beep and a yellow
light will appear on the keypad for 10-15 seconds.
4. Before the yellow light disappears enter a new code
and press the “A” key. The new code must be between
3 to 8 digits. If the code is valid, the keypad will beep 4
times. If you have failed to set a code or a wrong code
has been entered, wait for the yellow light to disappear
and repeat above steps 1-4.
WARNING
Test the new code several times (CODE+"B") before
closing and locking the door.
Security Lockout
If the incorrect code has been entered three times, the
keypad will lock for 5 minutes. You must wait over 5
minutes before being able to access the safe.
Override Keys To Open The Safe
In case of a forgotten password or if the batteries run
out, there is an override lock system to open the safe.
Remove the round plastic cap on the panel to locate the
key lock. Insert the key and turn counterclockwise and
pull the handle to open the safe. Do not keep the keys in
the wall safe.
Emergency Key
Interior Light Switch
Programming Button
Battery Compartment
Battery
Compartment
Steel Locking Bolts
Interior Light
Please Read Entire Manual.
Save For Future Reference.
