background image

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service 
unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to offer us your valuable 
feedback, you may contact us in the following ways:
Toll Free Telephone: 1-888-543-1388 (North America Only) / Toll Free Fax: 1-800-668-4562 
(North America Only)
E-mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
150 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products:  http://www.globe-electric.com

Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment. 

CAUTION IMPORTANT SAFETY INSTRUCTIONS

CAUTION: 

This device is warranted to last 2 years from the date of purchase. If it fails before that time, we will replace it. Send Globe Electric the device, 

proof of purchase and register receipt along with your complete name and address.  See caution text for proper use.  This warranty is void if this product is 

misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded. 
For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user-serviceable parts inside. This device is not intended for use with emergency 

exit fixtures or emergency exit lights, photocells and electronic timers. Minimum operating temperature is -20°C (-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference that may cause undesired operation. 

WARNING:

 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate 

the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and 

receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced 

radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS: 

When using electrical products, basic precautions should always be practiced including the following:

1.READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

2.Read and follow all instructions that are on the product or provided with the product. 
3.For a direct plug-in power unit, do not use an extension cord. 
4.Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and clearances from power and lighting conductors. 
5.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated 

construction. 
6.For a direct plug-in power unit, do not install or use within 10 feet of a pool. 
7.For a direct plug-in unit, do not use in a bathroom. 
8.For a direct plug-in power unit marked in accordance with following: 
WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit 

connected to the receptable. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not 

interfere with completely closing the receptacle cover. 
9.WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician. 
10.For a unit intended to be mounted greater than 0.30m (1 foot) from the ground surface.
WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface. 
For direct plug-in units, in accordance with fully engage into a standard receptacle that is weatherproof only when the receptable is covered (attachment 

plug cap not inserted and receptacle cover closed). With reference to instruction “WARNING: Risk of Fire. Installation involves special wiring methods to run 

wiring through a building structure. Consult a qualified electrician”, there shall be no literature, carton markings, or illustrations depicting or implying 

running wiring through a building structure.  

SAVE THESE INSTRUCTIONS

 – This manual contains important safety and operating instructions for power units. 

RF EXPOSURE

 

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with 

minimum distance 20cm between the radiator & your body. 

USER MANUAL NOTICE FOR LICENSE EXEMPT RADIO APPARATUS

 

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause 

interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-005 (B).

RADIATION EXPOSURE STATEMENT:

 

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with 

minimum distance 20cm between the radiator and your body.

FCC RESPONSIBLE PARTY

Globe Electric

2264 East 6th Street

San Bernardino, CA 92410

www.globe-electric.com 

SAVE THESE INSTRUCTIONS

50454

Check out the installation video on our website:

 globe-electric.com/smart

SMART OUTDOOR SPOT LIGHT

Summary of Contents for 50454









Reviews: