RGB-12-CONTROLLER
Model
LT-3600RF
LED
RGB
Controller
LT-3600RF (Common Anode)
Input Voltage
Max Current Load
Max Output Power
Grey Scale
Dimension
Package Size
Weight (G.W.)
DC12V
DC24V
～
216W/432W(12V/24V)
1024×1024×1024
L211×W40×H30(mm)
L313×W50×H32(mm)
230g
RGB-12-CONTROLLER
is
a
multi-functional
RGB
LED
controller,
use
the
advanced
PWM
(Pluse-Width
Modulation)
control
technology,
built-in
16
kinds
of
change
mode.
Smooth
changing
effect,
without
flicker;
PC
engineering
plastic
shell,
light
volume,
exquisite
appearance
;
The
receiver
has
8
buttons,
which
are
used
for
namely
on/off,
PAUSE,
MODE+/-,
SPEED+/-,
BRT+/-,
compatible
with
RF
remote
(100m
control
distance
).
DC12V-24V
wide
voltage
input,
3CHs
output
(common
anode),
wildly
used
for
all
kinds
LEDs
with
current-limiting
resistor,
like
RGB
LED
modules,
LED
strips,
SMD
and
so
on.
1. Technical Specs:
6A
3CH
×
Working Temperature
-30
-55
℃
℃
LED
RGB
Controller
Manual
Power Supply Chosen
DC CV SMPS
Remote Controlling Distance
Radio Frequency Range
RF Remote Output Power
ON/OFF, PAUSE, MODE+,MODE-, SPEED+,SPEED-, BRT+,BRT-.
8 function buttons on the receiver, which is corresponding to the first 8 button on the remote: namely
3.
Operation Instructions:
2. Product Dimension:
100m
433.92MHz
8mW
H
H
H
HH
H
40mm
30mm
16mm
15mm
10mm
10mm
203mm
20mm
211mm
50mm
15mm
108mm
Receiver Sign
RF remote
Control Sign
ON/OFF
PAUSE
MODE+
MODE-
SPEED+
SPEED-
BRT+
BRT-
Turn on/off the receiving controller.
Button
M
M
S
B
S
B
M1
M2
M3
M4
4 DIY
Keys
Description
Press to stop changing.
Press again to continue.
Attn: press for 3s to turn on/off the buzzer.
Press
to change modes
Press
for 3s to auto cycle loop all the modes
Press
for 3s to
MODE+/-
MODE+
MODE-
4 DIY modes
Press to speed up or slow down.
Press
for 3s, the changing speed of all modes
.
current mode
will revert to factory defaults.
SPEED+
will
revert to factory defaults
Press
for 3s, the changing speed of
SPEED-
Press to increase/decrease the brightness.
Keep pressing to change the brightness Continuously
Press for 3s to save your desired lighting effect.
Max 4 modes, could save repeatedly.
Press “Mode-“ in 3 seconds, the receiver will auto play these
4 DIY modes.
Attn:
Press Mode- for 3s, merely play the changing DIY modes, the static color will be skipped.
ID learning Method:
Learning ID
:
Press on/off on the receiver for 3s, the RF LED green indicator will be on, then press any
key on the remote, when indicator becomes off means activated.
Cancelling ID:
Press "on/off" on the receiver for 5s, the RF green indicator flashes once, then press any
key on the remote, when the indicator flashes several times means deactivated..
warranty
5 years
battery, A23-BP2
www.gmlighting.net e-mail: SALES@GMLIGHTING.NET GM Lighting, LLC •
9830 W. 190th St. • Unit F • Mokena, IL 60448 Toll-Free: (866) 671-0811 FAX: (708) 478-2640
