Golden Embers Wood Fired Ovens, Installation And Operating Manual

GOLDEN EMBERS WOOD FIRED OVENS 

INSTALLATION AND OPERATING GUIDE 

 
 
 
Congratulations! You have chosen one of the finest wood fired appliances available in the world today. To ensure that 
you enjoy the full benefit of using these extraordinary products, it is essential that you carefully follow all of the steps 
and procedures in this operating guide and seek the advice and assistance of your supplier wherever necessary. 
 
Your Golden Embers wood fired appliance has been constructed with the finest of refractory materials according to a 
technically advanced design based on thousands of years of history. With proper care and the minimum of maintenance, 
your appliance should last indefinitely. 
 
We realise that for many the use of wood fire appliances presents a new challenge and that a certain mystique has been 
attached to their usage. We believe that the information presented in this guide and the user manual will dispel any fears 
and misconceptions which you may have and enable you to rapidly convert your investment into the profitable centre 
piece of a successful eating establishment. 
 
All Golden Embers appliances, whether gas, wood or electric fired, are designed to give long and satisfactory service 
and have been fabricated from the best possible materials and workmanship. 

Nevertheless, proper selection, 

installation, adjustment and preventative maintenance is critically important if performance, efficiency and 
appearance are to be maintained for the life of the product. Please read all instructions carefully and seek 
explanations of anything you may be unsure of, as these instructions contain important safety information 
regarding the installation, use and maintenance of the appliance. 

 
ALL MATERIAL CONTAINED IN THIS DOCUMENT OR ANY OTHER DOCUMENT ISSUED BY GOLDEN 
EMBERS IS SUBJECT TO THE PROVISIONS OF INTERNATIONAL COPYRIGHT LAW AND MAY NOT BE 
REPRODUCED OR REPLICATED IN ANY WAY, WHETHER IN ORIGINAL FORM OR ANY MODIFIED 
FORM, WITHOUT THE PRIOR FORMAL WRITTEN CONESENT OF THE COPYRIGHT HOLDER. 
 
Instructions should be read and observed in the following sequence: 1) Any addendum or amended instructions as 
supplied with any upgrade or option. 2) Product specific instructions as supplied with the particular primary product 3) 
Quick reference operating guides supplied with the principal product  4) Component operating and instruction texts as 
may have been supplied   5) The Cooking with Fire Book  and finally  6) any third party or additional texts. 

PRE-INSTALLATION CHECK LIST 

To ensure installation and delivery are quick and simple and that you have selected the correct appliance for your 
establishment it is important that you establish and confirm the following items prior to ordering and delivery. 
 

• 

Use the product performance data sheets to establish exactly which product model or variant will satisfy your 
volume requirements, having made suitable allowances for planned growth when estimating your requirements. 

• 

Select the appropriate fuel type and source and ensure that there is a ready and reliable supply of that fuel. 

• 

Check with your local authorities what if any approvals and planning permission’s may be required. 

• 

Ensure that you have allowed sufficient space for the appliance to be correctly installed. Allow, if necessary, for 
any clearances from structures and adjacent appliances as may be stipulated by the local authorities. 

• 

Ensure that there is an access point sufficiently large to allow for delivery and installation of the unit. 

• 

Ensure that there is an adequate clear way from the point of unloading to the final position of set down and that the 
floor surface is able to bear the weight of the product during installation and positioning. 

• 

Check that there is sufficient clearance through doors, and passageways and between other structures and 
appliances so as to be able to move the appliance to its set down position in the cooking area. 

• 

Ensure that a dedicated flue can be installed in close proximity to the appliance or that appropriate measures have 
been taken to enable the flue to be safely connected to an existing extraction system. If a straight flue is to be 
installed, check that there are no beams or obstructions in the roof space above the appliance. 

• 

Check the type and pressure of any gas supply if the appliance is to be operated on gas. This must be specified prior 
to ordering so that the appliance can be configured appropriately for safe and efficient operation.