background image

 

 
 
 
 
 
 
 
 
 
 

 

1x4 HDMI 2.0a Splitter with Built-in& 

User Adjustable EDID Management 

and Audio Extractor 

 
 

User Manual 

 

 

 
 
 
 

 

 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

rev: 191108 

Made in Taiwan 

SP-5004IZM-DA 

 

The 

SP-5004IZM-DA 

1x4 HDMI 2.0a Splitter with Built-in& User Adjustable EDID Management 

and Audio Extractor

 has been tested for conformance to safety regulations and requirements, and 

has been certified for international use. However, like all electronic equipments, the 

SP-5004IZM-DA

 

should  be  used  with  care.  Please  read  and  follow  the  safety  instructions  to  protect  yourself  from 

possible injury and to minimize the risk of damage to the unit. 

●  Follow all instructions and warnings marked on this unit. 

●  Do not attempt to service this unit yourself, except where explained in this manual. 

●  Provide proper ventilation and air circulation and do not use near water. 

●  Keep  objects  that  might  damage  the  device  and  assure  that  the  placement  of  this  unit  is  on  a 

stable surface. 

●  Use only the power adapter and power cords and connection cables designed for this unit. 

●  Do  not  use  liquid or  aerosol  cleaners  to  clean this  unit.  Always  unplug the  power  to  the  device 

before cleaning. 

 

TABLE OF CONTENTS 

INTRODUCTION ................................................................................................................. 1

 

FEATURES ......................................................................................................................... 1

 

PACKAGE CONTENTS ...................................................................................................... 2

 

SPECIFICATIONS .............................................................................................................. 2

 

PANEL DESCRIPTIONS ..................................................................................................... 3

 

HARDWARE INSTALLATION ............................................................................................. 5

 

CONNECTION DIAGRAM ................................................................................................... 5

 

NOTICE............................................................................................................................... 6

 

WARRANTY ........................................................................................................................ 8

 

Summary of Contents for SP-5004IZM-DA






Reviews: