Installation Instructions
A/GPD 14 SEER “M” SERIES - Single Package
Dual Fuel Gas-Electric Heating & Cooling Units
Affix this manual and Users Information Manual adjacent to the unit.
These installation instructions cover the outdoor installation of
single package gas electric heating and cooling units. See the
Specification Sheet applicable to your model* for information
regarding accessories.
*NOTE: Please contact your distributor or our website for the
applicable Specifications Sheets referred to in this manual.
This Forced Air Central Unit Design Complies With Requirements
Embodied in The American National Standard / National Standard
of Canada Shown Below.
ANSI Z21.47•CSA-2.3 Central Furnaces
*NOTE: Please contact your distributor or our website for the
applicable Specification Sheet referred to in this manual.
ATTENTION INSTALLING PERSONNEL
Prior to installation, thoroughly familiarize yourself with this
Installation Manual. Observe all safety warnings. During
installation or repair, caution is to be observed.
It is your responsibility to install the product safely and to
educate the customer on its safe use.
Goodman Manufacturing Company, L.P.
19001 Kermier Rd., Waller, TX 77484
www.goodmanmfg.com or www.amana-hac.com
© 2011-2018, 2021 Goodman Manufacturing Company, L.P.
IO-407M
07/2021
Only personnel that have been trained to install, adjust, service
or repair(hereinafter, “service”) the equipment specified in this
manual should service the equipment. The manufacturer will not
be responsible for any injury or property damage arising from
improper service or service procedures. If you service this unit,
you assume responsibility for any injury or property damage
which may result. In addition, in jurisdictions that require one or
more licenses to service the equipment specified in this manual,
only licensed personnel should service the equipment.
Improper installation, adjustment, servicing or repair of the
equipment specified in this manual, or attempting to install,
adjust, service or repair the equipment specified in this manual
without proper training may result in product damage, property
damage, personal injury or death.
WARNING
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
RECOGNIZE THIS SYMBOL
AS A SAFETY PRECAUTION.
Summary of Contents for APD 14 M Series
Page 23: ...23 UNIT DIMENSIONS...
