Quick-start guide for Freesat
standard definition receiver
Model: GFSAT102DHS
In the box
Connect the receiver to a TV
using a SCART socket
Putting batteries in the remote control
Freesat standard definition receiver
Remote control
SCART cable
Two batteries
Quick-start guide
User guide
TV
Make sure that your TV and receiver are switched off.
Unplug your TV from the wall socket.
Connect the cable that comes from your satellite dish to the socket labelled ‘LNB IN’ on the back
panel of the receiver.
Connect the SCART cable that came with the receiver between the TV socket on the back panel of
your receiver and the SCART socket on your TV.
Switch on your receiver at the wall socket. The green light on the front panel will come on.
Plug your TV back into the wall socket and switch on your TV.
Open the battery cover on the back of the remote control.
Put the batteries (included with your receiver’s remote control) in as shown on the diagram above.
Put the battery cover back on.
1
2
3
4
5
6
1
2
1
4
2
5
3
6
1
1
2
2
3
3
3
4
4
5
6
GFSAT102DHS
GFSAT102DHS
GFSAT102DHS_QSG_0411.indd 1
4/15/2011 4:18:44 PM
