background image

134422

Your integrated ceramic glass cooking hob is manufactured 
exclusively for household use.
Materials used for packaging are friendly to the environment 
and can be reused (recycled), disposed of or disintegrated 
without any threat to the nature. All such materials are marked 
accordingly.
When you decide that your appliance is no longer of use to 
you, act responsibly and deliver it to the authorized household 
appliance scrap dealers.

Instructions for use have been prepared for the user. They 
describe the appliance features and proper handling.
These instructions are intended for various types of the 
appliance, so you may 

fi

 nd some descriptions for the functions 

that your particular appliance may not have.

All connections must be carried out in accordance with the 
instructions supplied with the appliance, and in compliance with 
the recognized standards.
Connections must be performed by quali

fi

 ed personnel only.

Rating plate with basic information is 

fi

 xed to the bottom side of 

the hob.

The appliance can be installed adjacent to a kitchen cabinet 
higher than the appliance on one side, while the kitchen unit on 
the other side must not exceed the height of the appliance.

Important  warnings  ................................................. 23
Ceramic glass cooktop surface  .............................. 24
Energy saving tips..................................................... 26
Hob controls .............................................................. 27
Special warnings and error reporting...................... 32
Cleaning and maintenance of ceramic-glass hob   34
Mounting the built-in cooktop  ................................. 35
Connection to the power supply .............................. 37
Technical information ............................................... 38

22

Dear Customer!

Rating plate

Integrated ceramic glass cooking hob 

Instructions for use

Connection instructions

Fire hazard protection

MT

IE

GB

Summary of Contents for SVK61SS




















Reviews: