background image

TM

User’s Guide

USA - FCC CFR 47 Part 15, Subpart B This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful 

interference, and (2) This device must accept any interference received, including interference 

that may cause undesired operation. This equipment has been tested and found to comply with 

the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and if not 

installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is                            

connected.

* Consult the dealer or an experienced radio/TV technician for help.

Operation with non-approved equipment is likely to result in interference to radio and TV 

reception. The user is cautioned that changes and modifications made to the equipment without 

the approval of manufacturer could void the user’s authority to operate this equipment.

Changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate the equipment.

Canada - ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Operation 

is subject to the following two conditions: (1) this device may not cause interference, and (2) this 

device must accept any interference, including interference that may cause undesired operation 

of the device.

European RoHS DIR 2002/95/EC

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources,

such as radiators, heat registers, stoves,

or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding-type

plug has two blades and a third grounding

prong. The wider blade or third prong

is provided for your safety. If the provided

plug does not fit into your outlet,

consult an electrician for replacement of

the obsolete outlet.

10. Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and

 Agency Certifications

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Thank You

Safety Information

Additional Safety Instructions

the point where they exit from the

apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

13. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus,

the apparatus has been exposed to rain

or moisture, does not operate normally,

or has been dropped.

14. To prevent risk of fire or electric shock,

avoid overloading wall outlets, extension

cords, or integral convenience receptacles.

16. See product enclosure for safety-related

markings.

17. Use proper power sources – Plug the 

product into a proper power source, as 

described in the operating instructions or as 

marked on the product.

Thank you for purchasing SMK-Link’s GoSpeak!™ Pro ultra portable speaker system. 

This User’s Guide is designed to help guide you through setting up your GoSpeak! 

Pro ultraportable speaker system.  The process of setting up your GoSpeak! Pro is 

an easy step-by-step process. Should you need additional help, we have the following 

additional resources:

Additional help and resources 

www.smklink.com 

Toll free technical support 

888-696-3500 

Free email technical support 

pcsupport@smkusa.com 

WARNING: To reduce the risk of fire or electrical shock, do not       

expose the system to rain or moisture.

WARNING: To reduce the risk of electric shock, do not disassemble 

this system unless you are qualified. Refer servicing to qualified 

service personnel.

The lightning flash with arrowhead symbol within an equilateral 

triangle alerts the user to the presence of uninsulated, dangerous 

voltage within the system enclosure that may be of sufficient 

magnitude to constitute a risk of electrical shock.

The exclamation point within an equilateral triangle, as marked on 

the system, is intended to alert the user to the presence of impor-

tant operating and maintenance instructions in this owner’s guide.

CAUTION: Make no modifications to the system or accessories. 

Unauthorized alterations may compromise safety, regulatory compli-

ance, and system performance.

CAUTION: Do not place any naked flame sources, such as lighted 

candles, on or near the apparatus.

CAUTION: Where the mains plug is used as the disconnect device, 

such disconnect device shall remain readily operable.

WARNING: Do not expose this apparatus to dripping or splashing 

and do not place objects filled with liquids, such as vases, on or near 

the apparatus As with any electronic products, use care not to spill

liquids into any part of the system. Liquids can cause a failure, 

electric shock, and/or a fire hazard.

Waste electrical and electronic products must not be disposed of with household 

waste. Please recycle where facilities exist. Check with your Local Authority or 

Retailer for recycling advice.

Reviews: