background image

Dear Grady-White Owner:

Welcome aboard!

Buying and owning a boat is a very special experience. Of all the many products you’ll ever own we want 

your Grady-White experience to be the absolute best. That means providing the descriptions, explanations 
and technical support that you need to enjoy your Grady-White with confidence and security.

Your Grady-White exceeds all US Coast Guard safety standards and is built to standards certified by the 

National Marine Manufacturers Association (NMMA). Best of all, your boat is built to Grady-White 
standards—standards that have served our owners through some truly extraordinary conditions since our 
first models built in 1959.

The seaworthiness and safety of your Grady-White is highly dependent on the operation, maintenance 

and care of your boat, so please read this manual thoroughly and keep it around for reference. If you need 
further explanation or “hands-on” help, don’t hesitate to ask the people at your Grady-White dealership; 
they have experience with the systems and operations of your boat. If for any reason you need additional 
help, please feel free to call us at the factory. We sincerely want to provide you with the help and information 
that will make your Grady-White experience delightful.

Thanks for choosing a Grady-White. All of us at the factory and at your dealership are dedicated to 

earning your confidence in Grady-White Boats. Again, welcome aboard.

Sincerely yours, 

Kris Carroll
President
Grady-White Boats, Inc.

Grady-White Boats, Inc.

5121 Martin Luther King Jr. Hwy, Greenville, NC 27834 • P.O. Box 1527 • Greenville, NC 27835-1527

Tel: 252-752-2111 • Fax: 252-752-4217 • http://www.gradywhite.com

Summary of Contents for Canyon 306











































































Reviews: