background image

Grady-White Boats, Inc.

5121 Martin Luther King Jr. Hwy, Greenville, NC 27834 • P.O. Box 1527 • Greenville, NC 27835-1527

Tel: 252-752-2111 • Fax: 252-752-4217 • http://www.gradywhite.com

Dear Grady-White Owner:

Welcome aboard!

Buying and owning a boat is a very special experience. Of all the many products you’ll ever 

own we want your Grady-White experience to be the absolute best. That means providing the 
descriptions, explanations and technical support that you need to enjoy your Grady-White with 
confidence and security.

Your Grady-White exceeds all US Coast Guard safety standards and is built to standards 

certified by the National Marine Manufacturers Association (NMMA). Best of all, your boat is 
built to Grady-White standards, standards that have served our owners through some truly 
extraordinary conditions since our first models built in 1959.

The seaworthiness and safety of your Grady-White is highly dependent on the operation, 

maintenance and care of your boat, so please read this manual thoroughly and keep it around for 
reference. If you need further explanation or “hands-on” help, don’t hesitate to ask the people at 
your Grady-White dealership; they have experience with the systems and operations of your boat. 
If for any reason you need additional help, please feel free to call us at the factory. We sincerely 
want to provide you with the help and information that will make your Grady-White experience 
delightful.

Thanks for choosing a Grady-White. All of us at the factory and at your dealership are 

dedicated to earning your confidence in Grady-White Boats. Again, welcome aboard.

Sincerely yours, 

Kris Carroll

President

Grady-White Boats, Inc.

Summary of Contents for Freedom 307




























































































Reviews: