background image

Connecting Cable

Propagation 

Lights

Light Grips

Vitopod Lighting Kit 

Instructions

Contents

Contents

Light kit for 

50W Vitopod

Light kit for 

100W Vitopod

Bracket kit only 

(Existing lights owned)

Plastic Brackets

2

2

2

Light Grips

4

4

4

Lights

2 x 60cm Lights

2 x 90cm Lights

Connecting 

Cable

1

1

Light Brackets

Summary of Contents for Vitopod

Page 1: ...podLightingKit Instructions Contents Contents Light kit for 50W Vitopod Light kit for 100W Vitopod Bracket kit only Existing lights owned Plastic Brackets 2 2 2 Light Grips 4 4 4 Lights 2 x 60cm Lights 2 x 90cm Lights Connecting Cable 1 1 Light Brackets ...

Page 2: ...re the grips are at the top of the slots and from the other side tighten the nut just enough to hold the grip in place 4 Rest the feet of the bracket on the edge of the Vitopod 5 Centre the bracket in relation to the vent on the Vitopod 6 Push the grips to expel air from all 3 segments of both grips The bracket should now be securely fixed to the Vitopod 7 Repeat steps 1 6 for the other bracket an...

Page 3: ... Output facing you Centre the lights over the Vitopod 12 Plug the power cord with on off switch into the input end of one of the lights Do not plug into a power socket at this time 13 Take the connecting cable Click one end of the connecting cable into the Input of one light and click the other end of the cable into the Output of the other light 14 Your lights can now be plugged into a power socke...

Page 4: ... benefit from 12 16 hours of good light per day The aim should be to use your lights to achieve these daylight hours In spring switch your lights on for 1 to 2 hours before sunrise and after sunset Use a timer if you want to automate this cycle Never leave your lights on 24 hours a day plants need a dark period On very cloudy or overcast days you can leave the lights on for the full 12 16 hours On...

Reviews: