INSTALLATION GUIDE – WARNING
Model NO. 17W/T8/4B/35K/DE
LIMITED WARRANTY:
This product is warranted to be free from defects in workmanship and material for 5 years. If it fails to do so,
Greenlite™ will send you, at its election, a replacement product or refund your original purchase price upon
receipt of the returned fixture, register receipt and proof of purchase. Please call
(844) 695-9090
to find out
how to return the product. Do not return this product to the retailer. This limited warranty does not cover product
subject to accident, neglect, abuse, misuse or acts of God. Replacement or refund is your sole remedy.
For all enquiries, please contact our customer service team at
info
@
greenliteusa.com
or
1-844-695-9090
from 9:00 AM to 5:00 PM EST.
www.greenliteusa.com
V1-11/01/2021
WARNING
- Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaire electrical systems.
Installation should be performed only by a qualified
electrician in accordance with the National Electrical Code and
relevant local code.
WARNING
- Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and
dimensions shown in the photographs and/or drawings.
WARNING
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other
sharp objects.
WARNING
- Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for installa-
tion of LED retrofit kit. Check for enclosed wiring and components.
• Disconnect power at the source before installation, inspection or removal. Do not simply switch off fixture.
• This item is rated at 120-277V. Installer must determine whether line voltage 120-277V is available at the luminaire
before installation.
• Not intended for use with emergency exit fixtures or emergency exit lights.
• Not for use with luminaire ballast.
• Do not use if product is damaged.
• This lamp is non-dimmable. Not for use with dimmers.
• Suitable for use with non-shunted and shunted lamp holders.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• “This luminaire has been modified to operate LED lamps” shall be marked on the retrofit luminaire where readily visible
by the user during normal maintenance including re-lamping.
• Risk of fire or electric shock. Do not open or modify. No user serviceable parts inside.
• Installers should not disconnect existing wires from lamp holder terminals to make new connections at lamp holder
terminals. Instead installers should cut existing lamp holder leads away from the lamp holder and make new electrical
connections to lamp holder lead wires by employing applicable connectors.
• SUITABLE FOR DAMP LOCATIONS. Suitable for use in wet locations when used in an outdoor-rated fixture. Not for use
where directly exposed to the weather or water.
• Complies with Part 15 of FCC. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received including interference that may cause
undesired operation.
• SUITABLE FOR “TYPE IC” OR “TYPE NON-IC” LUMINAIRES.
• No external weight or mechanical force should be applied to tube or components.
• THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE
COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAVING JURISDICTION.
• The lamps are intended to retrofit surface mount, Type IC or non-IC recessed mount listed fluorescent luminaires that
use maximum 4 tubular lamps.
17W LED T8 Linear Tube
Ballast Bypass - Double Ended
