Grizzly T27946, Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T27946

4-DRAWER ROLLING 

TOOL CABINET

INSTRUCTIONS

COPYRIGHT © MAY, 2017 BY GRIZZLY INDUSTRIAL, INC., REVISED MAY, 2017 (KB)

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

 OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 05/17) #JH18537 PRINTED IN CHINA

Introduction

The Model T27946 4-Drawer Rolling Tool Cabinet 
requires  some  assembly.  Follow  the  instructions 
below for assembly, operation, and maintenance.

Inventory 

Qty

•  Tool Cabinet with Drawers ........................... 1
•  Keys ............................................................. 2
•  Fixed Casters .............................................. 2
•  Swivel Casters w/Brake ............................... 2
•  Slot Head Screws M8-1.25 x 12 ................ 16
•  Flat Washers 8mm .................................... 16
•  Lock Washers 8mm ................................... 16

Figure 1. Model T27946.

•  To reduce risk of crushing injuries from 

tool cabinet tipping over on you:

— Do not stand on cabinet or in drawers.

— Only open one drawer at a time.

— Only move or transport cabinet with all 

drawers closed and locked.

•  Do not exceed weight capacities:

— Max individual drawer weight limit 

is 200 lbs. 

— Max total tool cabinet weight limit 

(including contents) is 800 lbs. 

•  To prevent accidental rolling, always lock  

caster brakes after moving cabinet.

•  Do not allow children  to have unsupervised 

access to cabinet.

V2.05.17

Assembly

The Model T27946 comes with two fixed casters 
and two swivel casters with brakes.

To install casters:

1.  With  help  from  another  person,  lay  cabinet 

upside down on floor (see 

Figure 2).

Note:  We recommend sweeping the floor 
clean and laying down a piece of cardboard 
or a blanket to prevent scratching the finish 
during this step.