GSL electronics BMPPT1500 Operating Instructions Manual Download

Page: 1 / 8

Page 1 of 8

Model:

BMPPT1500

Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia

1500W Solar Battery Charger

Booster Maximum Power Point Tracker

Operating Instructions

Please read these instructions before use

BMPPT1500-R1

This revolutionary maximum power point tracker solar charger was designed using the technology

that won GSL Electronics the prestigious “2008 EDN Innovation Award” and the “2009 Greentech

Consensus Award”. A simple, efficient and low cost alternative to charge sealed or vented

batteries from low voltage or parallel panels. With built in low voltage disconnect. Compatible with

our MCM module and PC Based GUI.

The BMPPT1500 is designed to automatically charge 24V and 48V sealed and vented lead
acid batteries from silicon based PV panels such as monocrystalline, polycrystalline and thin

film.

PATENT APPLIED FOR - 2010901565

Summary of Contents for BMPPT1500









Search results

Summary of Contents for BMPPT1500

Reviews:

Related manuals for BMPPT1500

Brands by name

Popular brands

GSL electronics BMPPT1500, Operating Instructions Manual

Search results

Summary of Contents for BMPPT1500

Reviews:

Related manuals for BMPPT1500

Brands by name

Popular brands