Manual version: 6PW101-20170411
BOM: 3123A19Y
i
H3C LSUM1FWCEAB0 firewall card
1
Card identifier
The card identifier LSUM1FWCEAB0 is at the upper right corner of the front panel.
2
Introduction
The LSUM1FWCEAB0 card is a 10-Gbps high performance firewall card that provides functions
including firewall, VPN, content filtering, and NAT. You can install it on an H3C S10500 or S7500E
switch to improve security capabilities of the switch without changing the network topology.
3
Specifications
The card has one console port, two USB ports, and two GE combo interfaces.
Figure 1 Front panel of the LSUM1FWCEAB0 firewall card
(1) Console port (CONSOLE)
(2) USB ports (reserved)
(3) 10/100/1000BASE-T copper combo port
(4) Copper combo port LED (LINK/ACT)
(5) 1000BASE-X fiber combo port
(6) Fiber combo port LED (LINK/ACT)
(7) Alarm LED (ALM)
(8) System LED (RUN)
(9) Ejector lever
(10) Captive screw
Table 1 Card specifications
Item Specification
Flash
8 MB Nor Flash
Memory
One memory slot
Standard configuration: 8 GB (one 8-GB DDR3
SDRAM)
CF card slot
One built-in CF card slot
Standard configuration: 4 GB
Maximum configuration: 4 GB
Dimensions (H × W × D)
40.1 × 399.2 × 376.8 mm (1.58 × 15.71 × 14.83 in)
Power consumption
109.0 W to 157.1 W
Weight
3.9 kg (12.79 lb)
Hot swapping
Supported
