hanit ® Installation Recommendation
- Privacy fence -
Thank you very much that you have chose the
hanit
®
Privacy fence
.
In the following description you find important hints which shall be implicitly taken into consideration when mounting the
screen.
We
have to highlight that the warranty and liability terms expire in disregard of the installation recommendations.
General advices:
Ÿ
The
hanit
®
Privacy fence
does not comprise a building-authority approval.
Ÿ
All profiles can be processed with standard tools. Additional information can be found
at
„
General Information
“
on
www.hahnkunststoffe.de
All Information covered by this recommendation, above all the data in regard to distances, are based on the assumption that the
installation will take place at around 20°C.
This document can at any time and without further announcement be replaced according to technical variations and/or latest technical
insights
All modules are made from recycled plastic. Variations in colour and structure of the surface are possible and no reason for complaints.
Deviations in dimensions based on the material properties are possible, too (+/- 3%).
Profiles made from recycled plastic expand when warming up and shrink when cooling down. At high temperatures this can lead to
bending of the profiles, what cannot be avoided and is also no reason for complaints about the material and products.
Ÿ
Ÿ
Ÿ
Ÿ
Systemdescription
The
Privacy fence
is of modular design. Tongue & groove boards are inserted and partially fixed to the carrying posts, which are
available as end, corner and field posts. The lowest row of tongue & groove boards is fixed in addition with a middle support. the
posts and the middle support are available in brown colour, the tongue & groove boards in grey, brown and green. The system is
designed for a max. construction height of 195 cm.
Parts
Endpost - WxHxL: 16x12x250 cm
Middle support - ØxL: 10x50 cm
Covering cap - WxHxL: 14x18x2,5 cm
Tongue & groove profiles - WxH: 3,8x13,0 cm
Fieldpost - WxHxL: 16x12x250 cm
Cornerpost - WxHxL: 16x12x250 cm
HAHN
HAHN Kunststoffe GmbH - Gebäude 1027 - DE 55483 Hahn-Flughafen
Telefon: +49 (0)65 43 / 98 86 - 0
Mail:
info@hahnkunststoffe.de
Fax: +49 (0)65 43 / 98 86 - 99 Online: www.hahnkunststoffe.de
