THERMAL WIRE STRIPPER
FT-8004
(with holder part)
●
PACKING LIST AND PART NAMES
Please make sure that all items listed below are included in the package.
Thank you for purchasing HAKKO products.
When using the product, please read this manual
and follow the instruction to change the parts.
2019.6
MA03051XZ190607
HAKKO FT-8004 ...................................1
Holder part (for use with C5012) ...........1
SEMS screw P2 (M3×6 for holder part) ...2
Hexagon wrench (1.27 mm) ..................1
Instruction Manual ................................1
Hexagon socket set screw (M2.5×2.5) ....2
PACKING LIST
Precautions Regarding Electrostatic Protection
CAUTION
This product includes features such as electrically conductive plastic parts and
grounding of the handle and
station as measures to protect the device to be
soldered from the effects of static electricity.
Be sure to observe the following instructions:
The handle and other plastic parts are not insulators, they are conductors. When
replacing parts or repairing, take sufficient care not to expose live electrical parts or
damage insulation materials.
Be sure to ground the unit during use.
Handle
HAKKO FT-8004
Blade (not included)
Hexagon wrench
Hexagon socket set screw
Instruction Manual
Lead adjuster
THERMAL W
IRE
STRIPP
ER
FT-802
SEMS screw P2
Holder part
OVERSEAS AFFILIATES
U.S.A.: AMERICAN HAKKO PRODUCTS, INC.
TEL: (661) 294-0090 FAX: (661) 294-0096
Toll Free (800)88-HAKKO
4 2 5 5 6
http://www.hakkousa.com
HONG KONG: HAKKO DEVELOPMENT CO., LTD.
TEL: 2811-5588 FAX: 2590-0217
http://www.hakko.com.cn
E-mail:info@hakko.com.hk
SINGAPORE: HAKKO PRODUCTS PTE., LTD.
TEL: 6748-2277 FAX: 6744-0033
http://www.hakko.com.sg
E-mail:sales@hakko.com.sg
Please access to the following address for the other Sales affiliates.
http://www.hakko.com
HEAD OFFICE
4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JAPAN
TEL:+81-6-6561-3225 FAX:+81-6-6561-8466
http://www.hakko.com E-mail:sales@hakko.com
© 2018-2019 HAKKO Corporation. All Rights Reserved.
Company and product names are trademarks or registered
trademarks of their respective
companies.
WARNING
If output setting is over 70%, the handpiece and holder can be very hot. Please be
sure to turn on the auto-sleep function before use.
(On HAKKO FT-801, please be sure to connect the station and holder with included
connecting cable in order for auto-sleep to function properly.)
WARNING
Operating above 80% output setting can cause stress to the heating element and
shorten the life of the blades. Use 80% and above power only when necessary.
When not using the handle, be sure to place it in the holder.
CAUTION
Since the blades will become hot, place the handle on the handle holder when it is
not being used.
