background image

2022.10

80.1034-001a

Instruction Manual

FX-971

Thank you for purchasing a HAKKO product.

This product is a soldering iron station.

Make sure to read this manual before using the product, and keep it in a safe place for future reference.

SOLDERING STATION

1.  Set contents and assembly

 

Station FX-971 .................................................................... 1

*

Handpiece FX-9701 ............................................................ 1

Iron holder FH-215.............................................................. 1

*

Cleaning sponge ................................................................. 1

Cleaning wire ...................................................................... 1

USB cable............................................................................ 1

Power cord .......................................................................... 1

Instruction manual (this document) ..................................... 1

Instruction manual 

(Quick Parameter Settings/Connecting to a Computer) ...... 1

FX-971

Tip  

(sold separately)

Power cord

Handpiece

Station

Iron holder

USB cable

Connect to a computer

(See the separate document 

"Connecting to a Computer")

Cleaning sponge

Cleaning wire

Confirm the contents before use.

*This product may differ from the following:

2. 

Specifications

Power consumption

100 W

Temperature range

50 to 450ºC (120 to 850ºF)

Temperature stability

At idle temperature: ± 3ºC (5ºF)

Handpiece

Power consumption 95 W (24 V)
Tip to ground  

resistance

< 2 

Ω

Leak voltage

< 2 mV

Heating element

Composite heater

Cord length

1.2 m (3.9 ft)

Total length

206 mm (8.1 in)

(with T39-D24 tip)

Weight

31 g (1.1 oz)

(with T39-D24 tip)

 

The total length and weight excludes the cord.

 

This product is applied with electrostatic countermeasures.

  Please note that specifications and appearance are subject to 

change without notice in the interest of product improvement.

Station

Output

AC 24 V

Dimensions

When angled: 

 

93 (W) × 126 (H) × 133 (D) mm 

(3.7 × 5 × 5.2 in) 

When not angled: 

 

93 (W) × 126 (H) × 123 (D) mm 

(3.7 × 5 × 4.8 in)

Weight

1.2 kg (2.6 lb)

CAUTION

 Handling precautions for ESD Safe products

This product contains electrostatic countermeasures, so please use the following precautions:

1.  Not all plastic parts are insulators, they may be conductive. Be careful not to expose live electrical parts 

or damage insulating materials when performing repairs or replacing parts.

2.  Be sure the product is grounded before use.

3.  Warnings, Cautions, and Notes

Warnings, cautions, and notes are placed at critical points in this manual to direct your attention to significant 

items. They are defined as follows:

WARNING: Failure to comply with a WARNING may result in serious injury or death.

CAUTION: Failure to comply with a CAUTION may result in injury to the operator, or damage to the items 

involved.

NOTE

: This indicates procedures or information that are important in a process described in this 

document.

Be sure to observe the following precautions to ensure safety.

WARNING

 This appliance can be used by children aged from 8 years and above and persons with reduced physical, 

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision 

or instruction concerning use of the appliance in a safe way and understand the hazards involved.

 Children shall not play with the appliance.

 Cleaning and user maintenance shall not be made by children without supervision.

 When this product is not used, place the handpiece on the iron holder.

 The tip reaches high temperatures when the power source is turned on. You may risk getting burned or 

causing a fire if mishandled.

 Do not touch the metal parts near the tip.

 Do not place anything that easily burns or ignites near the product.

 Make sure that people nearby are aware of the "high temperature danger."

 When the product is not in use, being repair, or being cleaned, turn off the power switch and disconnect 

the plug from the power outlet.

Failure to observe the following precautions to ensure safety might result in electric shock, malfunction or other 

trouble.

CAUTION

 Before using this product, fully read all descriptions in this document.

 Only use the product for soldering.

 Do not hit the handpiece against a workbench or subject it to strong shocks to remove solder residue.

 Soldering produces smoke, so make sure to work in a well-ventilated area.

 Use genuine HAKKO parts for included parts/replacement parts/options.

 Do not modify this product.

 Do not use damaged cords or plugs. Doing so can result in malfunction or injury.

 Do not use the product if it has been dropped or shows signs of damage.

 When inserting and removing the cord, hold the plug body and do not pull the cord.

 Do not allow this product to get wet. Also, do not handle it with wet hands.

 Do not perform any other actions that may be considered to be dangerous.

4.  Operation

4-1.  Station

Press and hold the lock release button while pulling up the top section to change the display angle.

Lock release button

Top

(Factory default)

Power switch

4-2.   Iron holder

 

The iron receptacle angle can be changed 45 ± 10 degrees with 

the knob.

 

Make sure to wet the cleaning sponge before using it.

 

The iron holder base can be removed by pressing the release 

button.

 

The tip can be stored in the tip insertion holder.

 

You can quickly and safely replace the tip using the iron holder.

Replacing the tip 

Use the "left/right or top/bottom grooves" of the tip removing attachment to replace the tip.

Tip removing attachment

Top

Top

Left

 

side

Bottom

Bottom

For tip

Right

side

For N

2

 Soldering Iron  

Nozzle Assembly

Use here to remove the tip.

(compatible to 2 types of tip size)

(1)  Insert the tip until the handpiece contacts the "right side groove." (Figure 1)
(2)  Pull the handpiece straight out. (Figure 2)

NOTE

Cool the tip in the tip removing attachment, and then rotate it to pull it out.

NOTE

Note that using too much downward force can damage the tip or handpiece.

For safety purposes and to prevent damage to the product, make sure to press the iron holder 

with your hand.

(3)  Insert the tip that has been placed in the tip insertion holder into the handpiece. (Figure 3)

NOTE

By using the tip insertion holder, tip can be inserted firmly to the end. 

Iron 

receptacle

Knob

Tip insertion holder

Iron holder base

Release button

For specific 

 

tip shapes

Tip removing  

attachment

Handpiece

Tip  insertion  

holder

The tip remains  

here.

Figure 1

Figure 2

Figure 3

Right side groove

OVERSEAS AFFILIATES

U.S.A.: AMERICAN HAKKO PRODUCTS, INC.

TEL: (661) 294-0090 FAX: (661) 294-0096

Toll Free (800) 88-HAKKO   

                                   4   2   5   5   6

https://www.HakkoUSA.com  E-mail: Support@HakkoUSA.com 

SINGAPORE: HAKKO PRODUCTS PTE., LTD.

TEL: 6748-2277 FAX: 6744-0033

https://www.hakko.com.sg     E-mail: sales@hakko.com.sg

HONG KONG: HAKKO DEVELOPMENT CO., LTD.

TEL: 2811-5588 FAX: 2590-0217

https://www.hakko.com.cn     E-mail: info@hakko.com.hk

HEAD OFFICE

4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JAPAN

TEL: +81-6-6561-3225 FAX: +81-6-6561-8466

https://www.hakko.com  E-mail: sales@hakko.com  

© 2022 HAKKO Corporation. All Rights Reserved.

Please access the code for overseas distributors.

https://www.hakko.com/doc_network

Reviews: