background image

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

     

HALO BOLT ACDC 58830

Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can 
safely jump start your car or charge  your laptop. In addition, you can 
use it to charge your phone, tablet or other electronic devices! The 
HALO BOLT ACDC 58830 also features a convenient LED floodlight.

TABLE OF CONTENTS

Included Items 
Operating Instructions
Troubleshooting Guide
Maintenance and Care
Safety Precautions
Specifications
Warranty and Contact Information

INCLUDED ITEMS

- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch

LOCATION OF CONTROLS

OPERATING INSTRUCTIONS

Please make sure to fully charge the HALO BOLT ACDC 58830.

CHARGING THE HALO BOLT ACDC 58830

To recharge the HALO BOLT ACDC 58830, use the provided AC wall 
charging adapter cable, and plug the AC adapter tip into the charge 
input.

Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC 
58830 will automatically begin charging. When the HALO BOLT ACDC 
58830 is fully charged, all four indicator lights will be solid green (This 
could take up to 9 hours).

When your HALO BOLT ACDC 58830 is on, the LED indicator lights will 
display the power level.

JUMP STARTING YOUR VEHICLE WITH

THE HALO BOLT ACDC 58830

1. Plug the jumper cables into the jump start output on the
    HALO BOLT ACDC 58830.

2. Attach the jumper cable clamps to the vehicle battery.
  - Red  clamp on positive terminal (+)
  - Black clamp on negative terminal (-)

3. Press the “Jump Start” button and wait for solid green light.

4. Start your vehicle.

5. Disconnect the jumper cable clamps from the car battery.

JUMP START TROUBLESHOOTING TIPS

CHARGING AN ELECTRONIC DEVICE USING

5V/2.4A USB OUTPUT PORT

1. Connect the Micro USB tip of the supplied Micro USB cable into the
    Micro USB input of your electronic device and connect the Standard
    USB end of the supplied Micro USB cable into either one of the
    HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.

2. Turn on the USB charging feature by pressing and releasing the
    USB Power ON/OFF Button on the HALO BOLT ACDC 58830.

HALO SMART CHARGE TECHNOLOGY

Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE 
TECHNOLOGY to achieve higher compatibility for charging standard 5V 
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will 
allow the HALO BOLT ACDC 58830 to communicate with your 
electronic device and provide the fastest and safest charge for that 
device.

COMPATIBILITY

Standard 5V USB electronic devices including: Mobile phones, Tablets, 
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.

USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT

The floodlight can be turned on and off by simply pressing and 
releasing the floodlight ON/OFF button. The floodlight will 
automatically turn off after 2 hours of inactivity.

MAINTENANCE AND CARE

- Do not get your HALO BOLT ACDC 58830 wet or store in extreme 
temperature conditions.
- Do not disassemble or attempt to repair your HALO BOLT ACDC 58830 
yourself.
- Use a soft cloth with soap to clean the exterior of your HALO BOLT 
ACDC 58830. Do not use liquid detergent or chemicals of any kind on 
your HALO BOLT ACDC 58830.

SAFETY PRECAUTIONS

- Your HALO BOLT ACDC 58830 has been designed and manufactured 
to ensure personal safety. Please read the following carefully before 
using. Incorrect operation or incompatibility with your personal 
electronic device may result in reduced battery performance or 
damage.
- Carefully read the operating instructions, and use your HALO BOLT 
ACDC 58830 correctly.
- Your HALO BOLT ACDC 58830 should not be used to jump start 
unregistered vehicles.
- Make sure the jumper cables are fully plugged into the jump start 
output before trying to jump your vehicle.
- Caution: The lithium-ion rechargeable battery used in this charging 
device may present a risk of fire or chemical burn if mistreated. Do not 
disassemble, expose to heat above 212°F (100°C) or incinerate.
- Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may 
cause electric shock to users and damage equipment.
- Your HALO BOLT ACDC 58830 may become warm under extended 
high power operation. During operation, keep your HALO BOLT ACDC 
58830 away from materials that may be affected by these 
temperatures.
- When used correctly, lithium- ion rechargeable batteries provide a 
safe and dependable source of portable power. However, if there are 
misused or abused, this may result in leakage, burns, fire or explosion, 

causing personal injury or damage to other devices.
- Do not disassemble your HALO BOLT ACDC 58830. There are no 
user-serviceable parts inside. Incorrect reassembly may result in shock 
or fire hazard.
- Do not drop or subject to strong impacts. Do not operate your HALO 
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise been 
damaged in any way.
- Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain, 
or snow.
- Do not insert any object into the ports or openings of your HALO 
BOLT ACDC 58830.
- Only charge your HALO BOLT ACDC 58830 by the specified method 
with the specified cable.
- In the unlikely event of leakage or explosion use sand or a chemical 
fire extinguisher.
- Batteries should be recycled or disposed of as per state and local 
guidelines.

SPECIFICATIONS

Battery Cell:            

 

 

        3x Li-Polymer 5300mAh

Battery Pack Power:  

 

 

 

              58830 mWh

Input:    

DC 14V/0.85A

USB Output:  

2x USB 5V/2.4A

AC Output:                                                   1x AC output port 115V (65 Watts)

Dimensions:  

 

182 x 97 x 40mm

Weight:   

754 g

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including 
interference that may cause undesired operation.

15.21
You are cautioned that changes or modifications not expressly 
approved by the party responsible for compliance could void the user’s 
authority to operate the equipment.

15.105(b)
This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to 
radio communications.

However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
     - Reorient or relocate the receiving antenna.
     - Increase the separation between the equipment and receiver.
     - Connect the equipment into an outlet on a circuit different from            
        that to which the receiver is connected.
     - Consult the dealer or an experienced radio/TV technician for help.

LIMITED WARRANTY

What does this limited warranty cover and how long is the coverage?

HALO INTERNATIONAL SEZC LTD warrants its products to be free from
defects in material and workmanship under normal use and service for 
a period of ninety (90) days beginning on the date your purchase the 
product.

What is not covered by this limited warranty?

This Limited Warranty does not cover defects or damage due to: (1) 
accidents, acts of God, misuse, abuse, abnormal use, abnormal 
conditions, improper storage, or exposure to liquid or moisture, (2) 
unusual or abnormal physical force or impact, including dropping of 
the product, (3) connection of the product to improper voltage supply, 
or (4) attempted repair or modification by anyone other than HALO or a 
facility authorized by HALO.

What are HALO’s obligations under this limited warranty?

Provided that you comply with the conditions of this Limited Warranty, 
during the duration of this Limited Warranty HALO will repair or replace 
the product, at its sole option, without charge. When repairing or 
replacing a product, HALO may, at its sole option, repair or replace the 
product with new, used, rebuilt or reconditioned parts or products. 
HALO will warrant any product that is repaired or replaced under this 
Limited Warranty for a period equal to the remaining time period under 
the original Limited Warranty or ninety (90) days, whichever is longer.

What are the limits of HALO’s Liability?

This Limited Warranty sets forth the full scope of HALO’s obligations 

and liabilities with respect to the product. All implied warranties, 
including, without limitation, implied warranties of merchantability and 
fitness for a particular purpose, are limited to the duration of this 
Limited Warranty. In no event shall HALO be liable for any incidental, 
special, consequential or punitive damages or any damages or losses of 
or to electronic equipment or products that are used with any of 
HALO’s products.

How does state law relate to this limited warranty?

Some states do not allow limitation on how long an implied warranty 
lasts or the disclaimer or limitation of incidental or consequential 
damages. Therefore, some or all of the disclaimers and limitations 
above may not apply to you.

CHARGING A LAPTOP (VIA THE AC OUTPUT PORT)

1. Connect the AC power plug from your laptop (or other electronic 
device which is rated at 65 watts or less) into the AC output port of the 
HALO BOLT ACDC 58830.

2. Press the AC Power ON/OFF Button and wait for a solid green light

LAPTOP CHARGING TROUBLESHOOTING TIPS

1

15

A

C

 

65

W

 

M

AX

Summary of Contents for BOLT ACDC 58830



















Reviews: