background image

HALO BOLT AIR+ DC

Thank you for choosing HALO!

Powerful and loaded with features including an easy to use digital 

display, the HALO BOLT AIR+ DC can be used to safely jump start your 
vehicle, inflate your tires and power your electronic devices anywhere. 

The HALO BOLT AIR+ DC provides portable power so you can charge 

your phone, tablet and other electronic devices anywhere! The HALO 

BOLT AIR+ DC includes an all new DC output that seamlessly integrates 

with 12V devices including a HALO AC inverter to power household 

items. The HALO BOLT AIR+ DC also includes a convenient floodlight 

and emergency light. Compact, versatile and simple to use, the HALO 

BOLT AIR+ DC and all accessories fit neatly in its carrying pouch and is 

perfect to store in your home or vehicle for every day use or an 

emergency need. Never be without a charge, a jump start, or with a flat 

tire again!

 

 

        SAFETY PRECAUTIONS

DANGER-CAUTION Read and understand all safety information 
before using this product. Failure to follow these instructions may 
result in electrical shock, explosion, fire which may result in serious 
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
  safe and dependable source of portable power. However, if they are
  misused or abused, this may result in leakage, burns, fire or explosion,
  causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT AIR+ DC may   
  cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of 
  flammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting 
  vehicle.
• Keep your HALO BOLT AIR+ DC dry and away from moisture and    
  corrosive materials. The HALO BOLT AIR+ DC should not be used near  
  water or wet areas such as bathtubs, showers, bathrooms, sinks, 
  swimming pools or basements.
• Do not expose your HALO BOLT AIR+ DC to moisture, water, rain, or 
  snow.
• Keep your HALO BOLT AIR+ DC away from heat sources, including 
  open flames, radiators, stoves, ovens, and any other devices that 
  product heat.
• The lithium-ion rechargeable battery used in this charging device may 
  present a risk of fire or chemical burn if mistreated. Do not expose to 
  fire or excessive temperature. Do not expose to heat above 212°F 
  (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
  fire extinguisher.
• Your HALO BOLT AIR+ DC may become warm under extended high 
  power operation. Do not cover, wrap, or otherwise restrict the HALO 
  BOLT AIR+ DC during operation.

• Do not disassemble your HALO BOLT AIR+ DC. There are no
  user-serviceable parts inside. Incorrect reassembly may result in shock
  or fire hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
  BOLT AIR+ DC if it has received a sharp blow, or has otherwise been
  damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT AIR+ DC by the specified method with 
  the specified charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT   
  AIR+ DC. Doing so may cause electric shock to users and damage 
  equipment. 
• The HALO BOLT AIR+ DC, along with its accessories, are not toys and 
  should be kept away from children. 
• Make sure the jumper cables are fully plugged into the jump start
  output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps   
  together at any point.
• Do not insert any foreign object into the ports or openings of your   
  HALO BOLT AIR+ DC.
• Do not clean your HALO BOLT AIR+ DC with harsh chemicals, soaps or
  detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT AIR+ DC’s charging ports do not become
  contaminated with lint or other debris. Use a canned-air type of
  product periodically to ensure that the port openings are clear.
• When using the air compressor, always check and follow the   
  manufacturer's recommended pressure. Use caution as the air hose 
  and connectors may get hot after extended use.
• Batteries should be recycled or disposed of as per state and local
  guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F   
  (-10°C - 50°C), Charge: 32°F - 113°F (0°C - 45°C)

INCLUDED ITEMS

- HALO BOLT AIR+ DC
- Jumper Cables
- AC Inverter
- Carrying Pouch

OPERATING INSTRUCTIONS

CHARGING YOUR HALO BOLT AIR+ DC

To charge your HALO BOLT AIR+ DC, use the provided Wall Charging 
Adapter, and plug the AC adapter plug into the charge input. Next, 
connect the AC adapter into a wall outlet. The HALO BOLT AIR+ DC will 
automatically begin charging. When the HALO BOLT AIR+ DC is fully 
charged, all five battery indicator lights will be solid green and the 
digital screen will indicate 100% charge. (This could take up to 9 hours).

While charging, the digital screen will illustrate the charge percentage  

of the HALO BOLT AIR+ DC. When fully charged, disconnect the cable. 

JUMP STARTING YOUR VEHICLE WITH

THE HALO BOLT AIR+ DC

1. Plug the jumper cables into the jump start output on the
    HALO BOLT AIR+ DC.

2. Attach the jumper cable clamps to the vehicle battery.
  - Red  clamp on positive terminal (+)
  - Black clamp on negative terminal (-)

3. Press the “Jump Start” button and wait for solid green light.

4. Start your vehicle.

5. Disconnect the jumper cable clamps from the car battery.

USING THE AC INVERTER

The DC to AC inverter can be used to power any device that operates at 

110VAC, this includes laptops that use a standard AC wall outlet.

Connect one end of the supplied DC cable to the DC Input on the AC 

Inverter and the other end to the DC Output on the HALO BOLT AIR+ 

DC. Connect your device’s AC plug in the AC Inverter’s AC port. The LED 

on the AC Inverter will be solid green if no safety protection is triggered 

and the device is charging normally.

TROUBLESHOOTING

   • If the LED on the AC Inverter is solid red, then a power fault is  

     detected.

   • If the LED on the AC Inverter is flashing red, then a temperature 

     protection is triggered.

If the LED on the AC Inverter is illuminated red, solid or flashing, unplug 

the device from the Inverter and disconnect the Invert from the HALO 

BOLT AIR+ DC. The Inverter will reset.

USING THE 12V DC OUTPUT

The 12V DC output may be used for powering numerous DC electronics 

and appliances. To use, simply connect the 5.5 x 2.5mm barrel jack 

connector from your device directly into the DC output port of the 

HALO BOLT AIR +DC. Turn on the DC output by pressing the ON/Off 

Button on the HALO BOLT AIR +DC. 

CHARGING AN ELECTRONIC DEVICE USING

5V/2.4A USB OUTPUT PORT

1. Use the charging cable provided with your electronic device and 
    connect the Standard USB end into either one of the HALO BOLT AIR+ 
    DC US 5V/2.4A Output ports.

2. Turn on the USB charging by pressing the
    USB Power ON/OFF Button on the HALO BOLT AIR+ DC.

HALO SMART CHARGE TECHNOLOGY

Your HALO BOLT AIR+ DC contains the HALO SMART CHARGE 
TECHNOLOGY to achieve higher compatibility for charging standard 5V 
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will 
allow the HALO BOLT AIR+ DC to communicate with your electronic 
device and provide the fastest and safest charge for that device.

COMPATIBILITY

Standard 5V USB electronic devices including: Mobile phones, Tablets, 
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.

USING YOUR HALO BOLT AIR+ DC FLOODLIGHT

The floodlight can be turned on and off by simply pressing and releasing 
the floodlight ON/OFF button. The first press will turn on the floodlight. 
Second press will turn on the red emergency light. Third press will turn on 
SOS flashing red light. The floodlight will automatically turn off after 2 
hours of inactivity.

SPECIFICATIONS

Battery Cells:           

 

 

        3x Li-Polymer 5000mAh

Battery Pack Energy:  

 

                  55500 mWh

Jump Start:  

 

 

 

 

          12V/600Amps

Air Compressor:    

 

 

 

               100PSI max

Input:    

 14V/0.85A

USB Output:  

2x USB 5V/2.4A

DC Output: 

12V/10A

Dimensions:  

 

4.65 x 9.52 x 1.85 inches

Weight:   

2.54 lbs

Operating Temperature:   

          32°F - 113°F (0°C - 45°C)

AC INVERTER 

DC Input:  

12VDC

AC Output:  

115VAC/60Hz

Rated Power:  

100W

JUMP START TROUBLESHOOTING TIPS

HALO BOLT AIR+ DC COMPRESSOR

The HALO BOLT AIR+ DC comes equipped with a 24 Inch Air Hose 
Extension and Interchangeable Air Nozzles. Simply twist on the 
corresponding nozzle to inflate balls, pool floaties, bike tires, and more!
1. Connect the air hose to the tire or use the appropriate nozzle to 
connect to your inflatable device
2. Press the (+) or (-) button to set the desired pressure. The pressure 
measuring units can be changed by pressing the UNIT button. 
3. Once the desired pressure has been set, begin inflating by pressing 
the Air Compressor ON/OFF button. The air compressor will shut off 
automatically once the pressure has been reached. 

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

COMPLIANCE WITH FCC REGULATION

This device complies with part 15 of the FCC Rules and RSS-Gen of IC 
Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause 
undesired operation.
NOTE: This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that 
   to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: To comply with the limits of the Class B digital device, 
pursuant to Part 15 of the FCC Rules, this device must be used with 
certified peripherals and shielded cables. All peripherals must be 
shielded and grounded. Operation with non-certified peripherals or 
non-shielded cables may result in interference to radio or reception.

TABLE OF CONTENTS

Safety Precautions
Included Items 
Operating Instructions
Troubleshooting Guide
Specifications
Warranty and Contact Information

LIMITED WARRANTY

HALO warrants its products to be free from defects in material and 
workmanship under normal use.

For all questions or exchange requests, please call 888-907-6274, 
contact us at zagg.com/support or visit 
www.zagg.com/warranty-policies.

This Limited Warranty sets forth the full scope of HALO’s obligations 
and liabilities with respect to the product.  All implied warranties, 
including without limitation the implied warranties of merchantability 
and fitness for a particular purpose, are limited to the duration of this 
Limited Warranty.  In no event shall HALO be liable for any incidental, 
special, consequential or punitive damages or any damages or losses of 
or to electronic equipment or products that are used with any of 
HALO’s products.

Summary of Contents for Bolt Air+DC





















Reviews: