Halo HPT-2600, Operating Instructions Manual

OPERATING INSTRUCTIONS

CONTENTS

Included Items

Operating Instructions

Maintenance and Care

Safety Precautions

Specifications

Warranty and Contact Information

INCLUDED ITEMS

- HALO POWER TASSEL

- Operating Instructions

LOCATION OF CONTROLS

1

 | 360º Carabiner

2

 | Leather Tassels

3

 | LED Battery Light Indicator

4

 | USB Cable

5

 | 2 in 1 Cable

OPERATING INSTRUCTIONS

Prior to first use, it is recommended to fully charge the HALO 

POWER TASSEL.

CHARGING THE HALO POWER TASSEL

Plug the USB cable into a computer or an AC adapter with a 

USB 5V output. Battery Indicators will blink to indicate 

charging.

CHARGING YOUR PERSONAL 

ELECTRONIC DEVICE

1. To charge Apple devices, attach the lighting tip over the 
Micro USB tip. Plug the lightning tip into your Apple device to 
begin charging.
2. To charge Android devices, plug the Micro USB adapter 
located underneath the lightning tip into your device to begin 
charging.

TURNING ON/OFF YOUR

HALO POWER TASSEL 

The HALO POWER TASSEL will automatically turn on and begin 

charging as soon as it is plugged into your personal electronic 

device. To preserve the battery, the HALO POWER TASSEL will 

automatically turn off when the electronic device is fully 

charged and no longer drawing power. When the HALO 

POWER TASSEL is manually unplugged from your device it will 

automatically turn off after 30 seconds.

COMPATIBILITY

MADE FOR IPOD/IPHONE

The HALO POWER TASSEL is Apple certified. “Made for iPod,”  
and “Made for iPhone,” means that an electronic accessory has 
been designed to connect specifically to iPod, or iPhone, 
respectively, and has been certified by the developer to meet 
Apple performance standards. Apple is not responsible for the 
operation of this device or its compliance with safety and 
regulatory standards. Please note that the use of this accessory 
with iPod, or iPhone, may affect wireless performance. AirPlay, 
iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina 
are trademarks of Apple Inc., registered in the U.S. and other 
countries.

MAINTENANCE AND CARE  

After prolonged use, the internal battery will become weak 

and the operation may become intermittent. When the battery 

is very low, the battery indicator will flash red to alert you to 

recharge the internal battery as soon as possible.

To maximize battery life: once the battery is fully discharged, 

immediately recharge (regardless of whether you plan to use 

this unit or not). If you do not plan to use the battery for an 

extended period of time (one week or longer), we recommend 

that you fully charge the battery. For longer periods of storage, 

please recharge the battery at least every two months to 

maintain the battery in optimum condition.

SAFETY PRECAUTIONS

This HALO POWER TASSEL has been designed and manufac-

tured to ensure your personal safety when used in the directed 

manner. Improper use can result in potential hazard.

Please read all safety and operating instructions carefully 

before installation and use. Keep these instructions handy for 

future reference.

- The HALO POWER TASSEL should not be used near water or 

wet areas such as bathtubs, showers, bathrooms, sinks, 

swimming pools or basements.

- To reduce the risk of fire or electric shock, do not expose the 

HALO POWER TASSEL to rain or moisture. Keep the HALO 

POWER TASSEL away from dripping, splashing, or any objects 

filled with liquids. Do not place anything on HALO POWER 

TASSEL.

- Keep away from heat sources, including but not limited to: 

open flame sources, radiators, stoves, ovens, cars, and 

amplifiers that produce heat.

- Do not expose HALO POWER TASSEL or  batteries to fire or 

sunshine.

- Do not puncture, crush or subject to mechanical shock.

- Do not disassemble.

- Unplug the charger when batteries are fully charged or not in 

use.

- Li-ion batteries must be recycled. Do not dispose of in the 

trash

SPECIFICATIONS

Model: HPT-2600

Battery Capacity: 2600mAh

Micro USB Input: 5V     1A

USB Output: 5V     1A

Dimensions (W x H x D): 1.5 inches x 9.3 inches x 1.5 inches

Weight:  164 grams

Charging Time: ~1 hour 40 minutes

Working Temperature: 0ºF to 45ºF

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions: (1) this device may 

not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may 

cause undesired operation.

Warning: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void 

the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to Part 15 

of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio communications.

However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or 

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected. Consult the 

dealer or an experienced radio/TV technician for help.

LIMITED WARRANTY

Halo International SEZC LTD warrants its products to be free 

from defects in material and workmanship under normal use. 

Conditions are as follows:

- During the first 90 days from date of purchase, Halo 

International SEZC LTD will repair or replace the defective 

product.

- Halo International SEZC LTD will, subject to inspection, repair 

the defective product or replace it with a new or recondi-

tioned unit. The return must be accompanied by a Return 

Merchandise Authorization (RMA) number to be issued upon 

request, and must be shipped prepaid. We do not offer 

shipping rebates at this time.

- Warranty is void if the product has been improperly handled 

or misused in any way, or if the label and/or bar-coded 

warranty label has been removed or tampered with.

- Where applicable, all requests for warranty returns must be

accompanied by a proof of purchase.

- The warranty does not extend to the electronic equipment 

that is used or which incorporates with any of our products 

and accessories.

Halo International SEZC LTD shall not be held responsible for 

the improper use of its products.

- For all questions or exchange requests, please call 

888-907-6274, or email us at support@BestHALO.com

This Limited Warranty sets forth the full scope of HALO’s 

obligations and liabilities with respect to the product.  All 

implied warranties, including, without limitation, implied 

warranties of merchantability and fitness for a particular 

purpose, are limited to the duration of this Limited Warranty.  

In no event shall HALO be liable for any incidental, special, 

consequential or punitive damages or any damages or losses 

of or to electronic equipment or products that are used with 

any of HALO’s products. 

HALO POWER TASSEL

Thank you for choosing HALO. The HALO POWER TASSEL is a 

portable charger to charge your devices, but also doubles as a 

fashion accessory. With their beautiful leather design, this item 

is the perfect crossroads where fashion meets function! 

Featuring 2600mAh of HALO Portable Power and the HALO 

2-in-1 cable featuring both micro USB and Apple certified MFI 

tips to charge any device. 

Please read the operating instructions carefully before using 

the HALO POWER TASSEL.