Page 1
Important Information:
These instructions and dimensions are provided for guidance only. They may require
adapting to individual site requirements and the design of the tank system.
When the filter is installed to provide the tank overflow, the rainwater divert and overflow
pipe must be horizontal and level.
If the downpipe is over 4 m to Frogmouth entry, install an elbow entry to reduce the velocity
of rainwater flowing from the roof line.
It is recommended that the push fit adaptors are secured with PVC cement/glue or a screw
fixing. The adaptors can be painted to match the colour of the downpipe. They should be
washed in soapy water and prepared with a primer coat before painting.
440mm
460mm
440mm
460mm
440mm
300mm
460mm
440mm
300mm
440mm
adaptor
68mm reducer
mm
68mm reducer
