Halytech
ABN 51 094 853 068
Tel: (02) 8814-5235 Email: sales@halytech.com.au
PO Box 6983 Baulkham Hills Business Centre NSW 2153
microSpider2 Industrial Quick Start Guide
This guide is not a replacement for the User Manual. Please refer to the complete microSpider2 manual
available from our website:
Once on our website go to Products
Data Loggers
microSpider Industrial, at the bottom of the page select
the ‘Downloads’ tab and from there you will be able to download the manual to suit your software version.
Package Contents:
Item
Quantity
Checked
microSpider2 Industrial
1
LAN Crossover Cable
USB Cable
Accessories Pack
1
Additional I/O Connector
Packed By:
Opening the microSpider2 Industrial
1. Disconnect all external power supplies and sensors from the microSpider2.
2.
Remove the microSpider2 Industrial top cover by gently squeezing the two tabs on the side of the
cover to release it from the base.
Closing the microSpider2 Industrial
Align the top of the case with the base and then press down so the two plastic clips lock into the top half of
the case.
