HAMPTON BAY DANETREE N243B-BN Use And Care Manual Download

Page: 1 / 17

THANK YOU

USE AND CARE GUIDE

72 IN. DANETREE

INDOOR/COVERED OUTDOOR CEILING FAN

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for

your home improvement needs. Thank you for choosing Hampton Bay!

1-855-HD-HAMPTON

HAMPTONBAY.COM

Questions, problems, missing parts? Before returning to the store,

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday

call Hampton Bay Customer Service

Visual instruction of how to install this fan:
Visit www.homedepot.com and enter either the Item or Model number to find
this fan and click the link of visual instruction in the product overview section.

Item #1008 698 231

1008 697 659

Model #N243B-BN

N243B-NI

Summary of Contents for DANETREE N243B-BN


















Search results

Summary of Contents for DANETREE N243B-BN

Reviews:

Related manuals for DANETREE N243B-BN

Brands by name

Popular brands

HAMPTON BAY DANETREE N243B-BN, Use And Care Manual

Search results

Summary of Contents for DANETREE N243B-BN

Reviews:

Related manuals for DANETREE N243B-BN

Brands by name

Popular brands