background image

 
 
                                                                                                                                                                                                        

                                                                                                                                                                                                                       GRM00696G                                                                                                              

 

11 

  

Outdoor Furniture 

 

 

 

 

IMPORTANT 

If you have any problems with this product (missing or damaged parts, assembly issues, etc.), 

PLEASE DO NOT RETURN TO THE RETAILER/STORE

  

where you purchased the product.   

Please call our Toll-Free Customer Service Hotline at: 

1-866-988-3300

 

Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday 

 
 
 

 

To expedite any future warranty claims, please retain the instruction sheet, warranty card 
and receipt for future use. 

 

Care and Maintenance 

Store furniture in an upright position. Be careful not to allow water to build up in frames, as this will cause 
corrosion  and  freeze  damage  in  cold  climates.  Wash  all  frames  with  a  solution  of  mild  soap  and  water. 
Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax 
for maximum protection against UV rays and/or salty, damp air. If your set includes cushions, slings, and/or 
an  umbrella,  they  may  be  cleaned  by  hand  with  a  solution  of  soap  and  water  with  a  clean  water  rinse. 
(Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After 
cleaning cushions, tip on end and allow to drip dry.  (Never use a commercial or home dryer to tumble dry 
fabric goods).  Do not use bleach or solvents to clean any product! This will void the warranty. 

 

 
 
 
 
 

Summary of Contents for GRM00696G














Reviews: