background image

2

1

3

5

4

6

I N S T R U C T I O N S

1567/1643 Stand-Up Toggles

Fits Midrange Cars:

 1624/1625/1628/1629/T27 Series

Parts List

Strictly follow all instructions to avoid an accident, damage 

to your vessel, personal injury or death. For additional safety 

information see www.harken.com/manuals.

N15W24983 Bluemound Rd • Pewaukee, WI 53072-4974 USA. 

Tel: (262) 691-3320 • Fax: (262) 701-5780 

Web: harken.com • Email: harken@harken.com

1567

 - use on cars with car mounted control blocks.  

1643 - 

has ears to attach control blocks to toggle. 

1567

1643

1567, 1643 Midrange stand-up toggles fit these Harken blocks:

Mainsheet Blocks

Size and Configurations

Pin diameter

Element*

45 mm singles, fiddles, doubles, triples 6 mm

1/4"

60 mm singles, fiddles 

6 mm

1/4"

60 mm doubles, triples 

8 mm

5/16"

Carbo 

75 mm singles, fiddles

6 mm

1/4"

75 mm doubles, triples

8 mm

5/16"

Classic Small Boat

3" single, fiddle

6 mm

1/4"

Midrange

All configurations

8 mm

5/16"

Black Magic

57 mm single  

6 mm

1/4"

57 mm doubles, triples

8 mm

5/16"

*1561 and 1638 toggles have increased spacing to fit Element block swivel posts. Element 
blocks do not fit toggles supplied before 2019.

Mainsheet block 

pin diameter

Control Blocks - 1643

End Controls

Purchase

2650 - Deadend on end control 

1631, E2730

2:1

2650 - Deadend on block

1632, 1633, E2740, E2746

3:1

342/2638 - Deadend on control

1632, 1633, E2750, E2756

4:1

These are a sample of combinations. Other combinations are available.

1567

1 Toggle with elastomer stand-up assembled
2 Large cotter pin

HFS181

3 8 mm (5/16") clevis pin

H-80166

4 Bushing - 6 mm (1/4") (2)

H-80167

5 6 mm (1/4") clevis pin

H-80165

6 Replacement set screws (2)

HFS971

Elastomer replacement

MP-1838

Summary of Contents for 1567

Page 1: ...es 6 mm 1 4 60 mm doubles triples 8 mm 5 16 Carbo 75 mm singles fiddles 6 mm 1 4 75 mm doubles triples 8 mm 5 16 Classic Small Boat 3 single fiddle 6 mm 1 4 Midrange All configurations 8 mm 5 16 Black Magic 57 mm single 6 mm 1 4 57 mm doubles triples 8 mm 5 16 1561 and 1638 toggles have increased spacing to fit Element block swivel posts Element blocks do not fit toggles supplied before 2019 Mains...

Page 2: ... place 6 Secure with set screw or swivel ear screw Assemble control blocks using blue Loctite on screws Note Use Loctite on stainless screws only Do not use on plastic set screws 1643 1 Toggle with elastomer stand up assembled 2 Large cotter pin HFS181 3 8 mm 5 16 clevis pin H 80166 4 Bushing 6 mm 1 4 2 H 80167 5 6 mm 1 4 clevis pin H 80165 6 Split rings 2 MS 002 7 5 mm 3 16 clevis pins 2 H 35241A...

Page 3: ...on 1643 Toggle Use 5 mm 3 16 clevis pins 1 Place block headpost between tangs Note If you are using double control blocks add the U Lock to align blocks and keep them from swiveling Both clevis pins Secure with cotter pin as shown 6 mm 1 4 clevis pin 1 Load plastic bushings from inside toggle Tip Slip small screwdriver into hole and use it as a guide to insert SS bushing 2 Slip 6 mm 1 4 clevis pin...

Page 4: ...then flush bearings with fresh water Do not use spray lubricants because ball bearings may skid not roll Apply one to two drops of McLube OneDrop to ball contact surfaces of track Roll car back and forth through OneDrop several times to distribute onto bearings Wipe remaining OneDrop off track OneDrop is preferred but you can also use one to two drops of a light machine oil too much oil attracts d...

Reviews: