I N S T R U C T I O N S
Loop Block
3195, 3196, 3199, 3201
1251 East Wisconsin Avenue
•
Pewaukee, WI 53072 U.S.A.
Telephone: (262) 691-3320
•
Fax: (262) 691-3008 Web: http://www.harken.com
•
E-mail: harken@harken.com
Parts
You Must Supply
Part
No.
Sheave
Ø
Maximum Working Load
(MWL)
Breaking Load
(BL)
Max line Ø
that fits
through mouth
lb
kg
lb
kg
3195
57mm
2500
1134
5,000
2268
5mm
3196
75mm
5,000
2,268
10,000
4536
8mm
3199
100mm
7,500
3,402
15,000
6804
11mm
3201
125mm
11,000
4,990
22,000
9977
14mm
1) Head
2) Sideplates
3) Sheave
4) Dead-End Post
5) Block Mouth
6) Screw
7) Allen Wrench
8) Blue Loctite
®
1
2
3
4
5
6
7
6
8
Loop and/or High Strength Lashing Line
Refer to chart above and choose loop and/or high strength lashing that
matches or exceeds break strength (BS) of block.
Note: See chart for
maximum line diameter that will fit through mouth
.
4' (1.2 m) line included for lashing to head.
Part
No.
Sheave
w/Side Balls
Roller Cage
Assembly
3195
H-21635B
HBB85
3196
H-21550B
HBB86
3199
H-22123B
HBB87
3201
H-23750C
HBB88
Part
No.
Screw
Dead-End
Post
3195
HFS796
H-43625
3196
HFS806
H-43461
3199
HFS816
H-43759
3201
HFS814
H-43816
Specifications
Sideplate A
Dead-End
Post
Roller Cage
Assembly
Sheave
Sideplate B
Screw
WARNING! Webbing or smaller lashings can be damaged by being
pinched between post and sideplate. Damaged webbing or lashings
can part suddenly under load. Use only loops when terminating at
dead-end post.
WARNING! Knots weaken line considerably. Consult qualified rigger
or line manufacturer for advice on securing line. Use high strength
loops or consult rigger for recommendations on lashing. Using the
wrong line or securing the line improperly can cause an accident.
Part
No.
Sheave
Ø
Sideplate
A
Sideplate
B
3195
57mm
H-43623
H-43624
3196
75mm
H-43456
H-43457
3199
100mm
H-43757
H-43758
3201
125mm
H-43814
H-43815
Loop Block Replacement Part Numbers
Small Control Line Included
Block
Part No.
Replacement
Part No.
Line
Length
Block
Part No.
Replacement
Part No.
Line
Length
3195
HCP1438
2 mm
3199
HCP1419
2.5 mm
3196
HCP1419
2.5 mm
3201
HCP392
3 mm
WARNING! Strictly follow all instructions to avoid an accident, damage to your vessel,
personal injury or death. See www.harken.com/manuals for additional safety information.
= Incorrect. Avoid to prevent accidents.
