I N S T R U C T I O N S
Ti-Lite Carbo AirBlock
®
351 (29mm), 2651 (40mm), 2607 (57mm)
1251 E. Wisconsin Avenue • Pewaukee, WI 53072 USA
Tel: 262-691-3320, Fax: 262-691-3008
Web: www.harken.com, Email: harken@harken.com
A2
Repeat A1 two times.
See: E Finish—
Dead-End Line.
A1
A2
A1
Pass line through
mouth, through head,
around bail, through
head and through
mouth in opposite
direction.
B1
Pass line through
mouth, through head,
around bail
so line
crosses
.
Go through
head and through
mouth in opposite
direction.
B1
B2
B Tie to Bail/Eyestrap—Perpendicular
B2
Repeat B1 two
times, crossing line
each time.
See: C Tie to Boom.
for complete
instructions.
See: E Finish—
Dead-End Line.
A Tie to Bail/Eyestrap—Parallel
WARNING!: Use three loops of the line supplied.
Using fewer loops will weaken the block causing
it to break suddenly causing an accident, damage
to your vessel, personal injury or death. See
www.harken.com for additional safety information.
Inspect Line Every Time You Sail
Inspect line for chafe or UV-damage every time you sail. Replace
damaged line immediately. Replace line with no visible damage after
no more than two-years use. Consult Chart B (left) for replacement
line or use block breaking strength, Chart A (left) to select the
correct line.
Tie to Mouth of Block
Use Three (3) Loops of Supplied Line
Tie Only to Objects with Rounded Edges
Part
No.
Reorder
Part No.
Line Ø
Line Type
in
mm
351
HCP1438
1/16
2
Maxibraid
2651
HCP1419
3/32
2.5
Maxibraid
2607
HCP392
1/8
3
Maxibraid
Chart B—Line Replacement
*Includes 4' (1.2m) line
Part
No.
Size
(mm)
Maximum Working Load (MWL) Breaking Load (BL)
lb
kg
lb
kg
351*
29
330
150
1000
454
2651*
40
485
220
1200
544
2607*
57
792
360
2380
1080
Chart A—Block Specifications
3 LOOPS
hEAD
MOUTh
Strictly follow all instructions to avoid an accident,
damage to your vessel, personal injury or death. See
www.harken.com for additional safety information.
WARNING!: Attach only to objects with rounded edges.
Do not tie block to stamped eyestrap. This will cause
line to chafe and break suddenly causing an accident,
damage to your vessel, personal injury or death. See
www.harken.com for additional safety information.
WARNING!: Tie only to the mouth of the block as
shown. Do not tie to head of block. This will cause
the block to break suddenly causing an accident,
damage to your vessel, personal injury or death. See
www.harken.com for additional safety information.
WARNING!: Failure to inspect and replace UV-
damaged, worn or frayed line can cause the line
to break suddenly causing an accident, damage
to your vessel, personal injury or death. See
www.harken.com for additional safety information.
CORRECT
Rounded
Sharp
INCORRECT
CORRECT
INCORRECT
