Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
DocID: 549841_12.09.2022
EN
Multi effects unit DNAfx GiT Mobile II
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Features
• Direct connection to the electric guitar with a 1/4" rotatable jack plug
• 14 amp modelings
• 14 different high-quality digital effects
• Five Tone/EQ Settings
• USB-C port for audio recordings and charging
• Headphones output, designed as 1/4" jack socket
• Bluetooth® 5.0 connectivity for audio playback
• Lithium-ion rechargeable battery operation
• USB-C cable included
Connections and operating elements
Safety instructions
Intended use
This device is intended to be used for sound processing of signals from musical instruments
with electromagnetic pickups. Any other use or use under other operating conditions is con-
sidered to be improper and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that chil-
dren do not detach any small parts (e.g. knobs or the like) from the product.
They could swallow the pieces and choke! Never let children unattended use
electrical devices.
Incorrect handling of lithium batteries can result in injury
• In the event of a short circuit, overheating or mechanical damage, lithium batteries can
cause severe injuries.
• When handled correctly and appropriately lithium batteries pose no risk.
• Store lithium batteries in a cool, dry place, ideally in the original packaging.
• Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batter-
ies are hermetically sealed. Never attempt to open a lithium battery.
• If the battery housing is damaged small amounts of the electrolyte may leak out. If this
should happen, seal the lithium battery in airtight packaging and wipe up the traces of
electrolyte using absorbent paper towels. You must wear protective rubber gloves when
doing so. Clean your hands and the affected surface thoroughly with cold water.
• Never attempt to recharge non-rechargeable lithium batteries. When charging lithium
batteries you must use a suitable charging device intended for the purpose.
• Before disposing of the device remove the lithium batteries. Protect used lithium batteries
against potential short circuits, e.g. by covering the poles with adhesive tape.
• Only use powder extinguishers or other suitable extinguishing agents to extinguish a
burning lithium battery.
Possible damage to lithium-ion batteries through incorrect storage
By deep discharge, lithium-ion batteries can be permanently damaged or lose some of their
capacity. Before long breaks, charge the batteries to around 50 % of their capacity and then
switch off the device. Store the device at room temperature or cooler in an environment as
dry as possible. If the batteries are stored for a longer period, recharge them to 50 % every
three months. Fully charge the batteries only shortly before use at room temperature.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid
cleaners such as benzene, thinners or flammable cleaning agents.
ON
OF
F
AM
PT
ONE
EF
X
*
+
ö
#
$
%
&
'
(
)
1
1/4" jack plug for connection to the instrument
2
Button to toggle between the menu items and to increase a value
3
Button to toggle between the menu items and to decrease a value
4
[EFX]
Button to call up the digital effects of the amp modeling models
5
[TONE]
Button to call up the timbre of the amp modeling models
6
[AMP]
Button to call up the amp modeling models
7
/
[ON]
/
[OFF]
Main switch
Set the switch to
[ON]
to switch on the unit. The status LED lights up.
Set the switch to to enable the Bluetooth® function for the audio playback.
Set the switch to
[OFF]
to switch off the unit.
8
Control to adjust the instrument signal volume
9
Headphones output, designed as 3.5 mm phone socket
10
Port for the included USB-C cable for audio recordings and charging the unit
