DR-GW1000
DIN RAIL MOUNTED ETHERNET GATEWAY
DR-GW1000 is a DR-Link protocol compliant
Ethernet gateway designed for use with Direct
Series lighting control modules and is capable of
auto acquiring online devices within the range and
monitoring and reporting any operation error of the
lighting system.
•
Designed for standard 35mm DIN rail installation [Space Occupa-
tion: 4P (per P:18mm)].
•
Online upgrading.
•
Communication through DR-Link interface and capaple of auto
acquiring online devices and monitoring and reporting operation
errors.
•
Two DR-Link interfaces connects up to 63 DR-Link devices.
•
An extended control system can be set up through ethernet connec-
tion with IPad, Andriod touch panel or AMX controller.
•
Data import/export.
•
Local or remote data download through Ethernet connector.
1.
LED Indicators and Control Buttons:
•
POWER: indicates status of power supply.
•
LINK: indicates status of control interface. When solid on, the
control interface is operating correctly; When blinking, a fault
appears to the control interface.
•
RESET: resets IP to factory default (192.168.1.230:6000).
Press for 6 seconds and wait till the LINK LED stops blinking.
Then the resetting is successful.
•
CLEAR: clears all setting data from the module. Press for 6
seconds and wait till the LINK LED stops blinking. Then all
the setting data are successfully erased.
2.
DR-Link Interface: 24V, G, A, B.
3.
RS232 Interface: uses a Phoenix terminal to connect a RS232
device. Port parameter: 115200,n,8,1.
4.
Control Keypad Interface: uses a RJ45 connector (with LED indica-
tors) to connect a control keypad. The cable connected should be
wired to 586B standard.
5.
Electrical box Interface: uses a RJ45 connector (with LED indica-
tors) to connect an electrical box. The cable connected should be
wired to 586B standard.
6.
ETHERNET Interface: uses a RJ45 connector (with LED indicators)
to connect a router. The cable connected should be wired to 586B
standard. The two ETHERNET connectors can not be used simulta-
neously. Please choose only one of the two to connect.
FEATURES
STRUCTURE
SPECIFICATIONS
Power supply
DC 24V 90 mA
Control interface
2 × DR-Link
Ethernet
1 × RJ45 connector (with LED indicators)
Cascade connection
1 × RJ45 connector (with LED indicators)
Control keypad
1 × RJ45 connector (with LED indicators)
LED indicators
1 × POWER, 1 × ETHERNET, 1 × LINK
Connectivity
Support up to 63 DR-Link devices
Control buttons
1 × RESET, 1 × CLEAR
Downloading
1 × Ethernet connector
Operation temperature / RH
0˚C - 45˚C / 20% - 93% RH
Storage temperature / RH
-40˚C - +55˚C / 10% - 93% RH
Dimensions (L x W x H)
72 mm × 98 mm × 68 mm (4P)
Weight
190 g/pcs
ETHERNET
4
3
6
6
2
2
5
路
由
接
口
电箱级联
电
箱
级
联
1
DIRECT SERIES LIGHTING CONTROL MODULE
ETHERNET
68
98
72
measured in mm
