background image

Instructions for

Havis Protective Case

For Apple iPad

DS-DA-700-SERIES_OMN_4-14

www.havis.com

1-800-524-9900

DS-DA-701 for iPad 2/3

DS-DA-702 for iPad 4

DS-DA-703 for iPad Air

Havis, Inc.

75 Jacksonville Road

Warminster, PA 18974

47801 Anchor Court

Plymouth, MI 48170

www.havis.com     1-800-524-9900

FCC Statement / Declaration of Conformity

Specifications

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

Power Supply Input

5V (10 Watt)

Dimensions

11.4” ( 28.9 cm)  W x 8.7” ( 22.1 cm ) D x 0.87” ( 2.2 cm ) H

Weight

0.8 lbs ( 0.36 kg )

Operating Environment

0° C to 35° C  ( 32° F to 95° F )

Storage Environment

-20° C to 45° C  ( -4° F to 113° F )

This device complies with the requirements of the Code of Federal Regulations listed below:

FCC Title 47 CFR, Part 15 Class  foBr a digital device.

Operation is subject to the following two conditions:

(1)  This device may not cause harmful interference, and 

(2)  This device must accept any interference received, including interference that may

       cause undesired operation. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial environment.  This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with instruction manual, may cause harmful interference to radio communications.  Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

Related Product

Havis offers a Docking Station specifically for use with the DS-DA-700 

Series Protective Case.  For more information or to order, please visit 

www.havis.com.

DS-APP-102

Docking Station

Docking Station for Apple iPad for in vehicle

computing.

Summary of Contents for DS-DA-701









Reviews: