background image

 

  Thank  you  for  your  purchase  of  The  HawksHead  TRACK  MASTER  TPMS 
System 
 
With ease of installation and a compact data monitor with clear LCD display and 
built in rechargeable lithium battery, The Track Master monitor has an automatic 
backlight for both day and night use. The monitor can handle up to 5 wheels by 
the addition of an extra sensor (purchased separately)  beyond our 4 wheel base 
system for monitoring a spare tire. Designed for pressures from 16 to 50psi and 
temps up to 199 F 
High  and  low  pressure  warnings  along  with  high  temperature  warnings  can  be 
set  by  the  user.  The  monitor  gives  both  visible  and  audible  alerts  for  High 
pressure,  Low  Pressure,  Rapid  pressure  drop  and  high  temperature.  Pressure 
and Temperature units can be displayed in PSI, Bar and Temperature in degrees 
F & C.. 
 
 

System Components 

 

 

 

 

 
Sensors Feature 
Replaceable  CR1632    batteries,  Simply  fits  to  valve  stem,  Water  and  dirt 
resistant, Unique codes. 
Monitor Features 
Super  compact  screen,  Automatic  sleep  mode,  rechargeable  power  pack,  Auto 
backlight 
 

 
 
 

Summary of Contents for TRACK MASTER











Reviews: