background image

 

 

03/18 

Model 7603BLH/7603BL240H 

Page 1 of 7 

 

 

 

 

     No. 0510000806 (1) 

 

1455 Kleppe Lane 

Sparks, NV 89431-6467 

(775) 359-4712 

Fax (775) 359-7424 

E-mail: 

haws@hawsco.com

 

 

website: 

www.hawsco.com

 

 

 

 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 

Model 7603BLH/7603BL240H 

Hazardous Location Heated Blanket for 7603 Portable Eyewash 

 

INSTALLATION, OPERATION 

MAINTENANCE INSTRUCTIONS 

 

 

LIMITED WARRANTY

 

 

HAWS warrants that this specific product is guaranteed against defective material or poor 
workmanship for a period of 

one year from date of shipment

. HAWS liability under this 

warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any 
goods, or part thereof, which shall appear to the Company upon inspection to be of 
defective material or not of first class workmanship, provided that claim is made in writing 
to Haws within a reasonable period after receipt of the product. Where claims for defects 
are made, the defective part or parts shall be delivered to the Company, prepaid, for 
inspection. HAWS will not be liable for the cost of repairs, alterations or replacements, or 
for any expense connected therewith made by the owner or his agents, except upon 
written authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages 
caused by defective materials or poor workmanship, except for replacements, as 
provided above. Buyer agrees that Haws has made no other warranties either expressed 
or implied in addition to those above stated, except that of title with respect to any of the 
products or equipment sold hereunder and that HAWS shall not be liable for general, 
special, or consequential damages claimed to arise under the contract of sale. 
 
The emergency equipment manufactured by HAWS is warranted to function if installation 
and maintenance instructions provided are adhered to. The units also must be used for 
the purpose for which they were intended. This product is intended to supplement first-aid 
treatment. Due to widely varying conditions, Haws cannot guarantee that the use of this 
emergency equipment will prevent serious injury or the aggravation of existing or prior 
injuries

 

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED OR GIVEN BY HAWS. 

 

NOTE TO INSTALLER: Please leave this information with the Maintenance Department. 

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF 
THIS MODEL PLEASE CALL: 
 

      

TECHNICAL SUPPORT:

 

1-800-766-5612 

 

FOR CUSTOMER SERVICE:    

1-888-640-4297 

Summary of Contents for 7603BLH








Reviews: