background image

 

Instruction Manual

8077882

WHAT’S INCLUDED:

 

 HRS 5017 Earbuds

 Set of ear tips: Small, medium and large

 Micro USB charging cable

• 

Carry case

 Instruction manual

CHArgINg

Fully charge your earbuds before your first use. 

 The earbuds will beep every 60 seconds and the 

red LED will flash every few seconds to indicate 

low battery

 Plug the micro USB cable into the micro USB port 

or to a USB compatible car or wall charger

 The red LED will be ON when the earbuds are 

charging, even while the earbuds are turned OFF

 The blue LED will turn ON when charging is 

complete

 Charging time is approximately 2 hours

NoTE:

 If the earbuds are not charged for a long 

time, the battery life will be greatly reduced. We 

recommend that you charge your earbuds at least 

once every three months.

BATTEry CApACITy STATUS

When the earbuds are connected to an iOS

®

 

device, the earbud battery status will appear in the 

upper right-hand corner of the device. When the 

battery icon is red, please charge the earbuds.

pAIrINg

Pairing with one smartphone or other device:

• Press and hold the MFB button to turn the ear-

buds ON and enter into pairing mode or recon-

nect with the previously paired device

• The earbuds will beep and the red LED and blue 

LED will flash alternately when in pairing mode

• Locate the Bluetooth

®

 settings in your device and 

search for the earbuds 

• From the list of found devices, select “HRS 5017” 

and connect to it 

• Follow the instructions and enter "0000" as PIN if 

required

• Bluetooth

®

 will connect automatically

FIT

We recommend that you try each ear tip (small, 

medium and large), then perform a sound check 

and choose the combination that provides the best 

sound experience.

 Put the earbuds in your ears (L in left ear and R 

in right ear) and adjust the position for maximum 

comfort and fit

 Adjust ear hooks to achieve optimal fit and 

stability

  Drape the earbuds around the back of your neck

opErATINg INSTrUCTIoNS

 

Function

Status

Operation

Answer call

Incoming rings

Press the MFB 

button

Reject call

Incoming rings

Long press the 

MFB button 

End call

Answering

Press the MFB 

button

Increase volume

Answering

Press + button

Decrease volume

Answering

Press - button

Redial

Connected to 

device

Press the MFB  

button twice

NoTE: 

The function compatibility may vary among 

different smartphones or devices. Not all functions 

are available on all devices.

For optimal call quality, please place the micro-

phone as close to your mouth as possible. Some 

calls will automatically go to your mobile device. 

Simply use the call switch function on your mobile 

device to switch the call to your earbuds. Please 

read your device’s instruction manual.

pLAyINg MUSIC

Function

Status

Operation

Increase volume

Play music

Press the + button

Decrease volume

Play music

Press the - button

Previous track

Play music

Press and hold the 

- button

Next track

Play music

Press and hold the 

+ button

Pause play

Play music

Press the MFB 

button

Resume play

Pause play

Press the MFB 

button

NoTE: 

Remote functions (next track, previous 

track, pause, restore) require that the paired  

Bluetooth

®

 device supports AvRCP.

LED INDICATor

Power ON

Blue LED flashes

Power OFF

Red LED flashes

Pairing

Red and blue LED flash alternately

Standby

Blue LED flashes once every few seconds

The Source warrants that this product will be free from de-
fects in materials and workmanship for a period of one (1) 
year from the date of purchase. Within this period, simply 
take  the  product  and  your  proof  of  purchase  to  any  The 
Source  store  or  participating  dealer  and  the  product  will 
be replaced (where available) without charge. Any product 
which has been subject to misuse or accidental damage is 
excluded from this warranty. 
This  warranty  is  only  applicable  to  a  product  purchased 
through  The  Source  company-owned  stores  or  participat-
ing dealers in Canada where the warranty is included with 
the product. While this warranty does not confer any legal 
rights other than those set out above, you may have addi-
tional statutory rights which will vary under the laws of the 
various countries, states, provinces and other governmental 
entities in which The Source operates. This warranty is sub-
ject to all statutory rights you may have in Canada. 

© 2018 The Source

All rights reserved.

Imported by: The Source,
Barrie, Ontario, Canada, L4M 4W5
Manufactured in China
www.thesource.ca

Please Recycle

Power ON

Blue LED flashes

Charging

Red LED ON

Charging complete

Blue LED ON

Low battery

Red LED flashes once every few seconds

rESTorE FACTory SETTINgS

•  In Bluetooth

®

 connected mode press and hold 

the MFB button and - Decrease volume/previ-

ous track button for 5 seconds. The earbuds will 

beep once reset is successful.

NoTE: 

After factory settings have been restored, 

the earbud’s pairing list will be eliminated. You will 

need to re-pair with your devices. 

CLEANINg

Your earbuds may require periodic cleaning. 

Remove the tips from the earbuds and wash them 

with a mild detergent and water. Make sure the tips 

are dry before putting them back on the earbuds.

IMporTANT SAFETy INForMATIoN

CAUTIoNS

• 

Keep in a safe place free from dust, liquid and 

extreme temperatures

• 

Do not attempt to disassemble the product

• 

Do not use chemicals to clean the product

WArNINg!

•  Do not insert plug into electric outlets

•  Supervise children when using equipment, this 

product is not a toy

•  Listening to headphones at high volume levels–

particularly, over extended periods of time–may 

damage your hearing

•  If you have a pacemaker or other electrical 

medical devices, you should consult your  

physician before using this product 

•  The operation of switching on your Hi-Fi system 

or plugging in the earbuds may cause clicks 

which at high volume setting may affect your 

hearing. Therefore, always set the volume 

control to minimum before switching between 

different sources (tuner, turntable, CD player, 

etc.) or plugging in the earbuds 

•  DO NOT use earbuds while driving or cycling

•  The small parts included with this product 

can be a choking hazard. This product is not 

intended for use by small children and should be 

kept away from children under 3 years of age 

TroUBLESHooTINg

No sound

•  Power ON the earbuds and charge the battery

•  Increase the volume on your earbuds and  

Bluetooth

®

 device

•  Make sure you are using the correct paired de-

vice

•  Move your Bluetooth

®

 device closer to the 

earbuds and away from any interference or 

obstructions

•  Use a different music source

•  Pair a different Bluetooth

®

 device 

•  If two Bluetooth

® 

devices are connected, pause 

the first device and play the other device 

•  If two Bluetooth

®

 devices are connected, move 

the devices within range of the earbuds  

poor sound quality

•  Use a different music source

•  Pair a different Bluetooth

®

 device

•  Disconnect the second device

•  Move the Bluetooth

®

 device closer to the 

WIRELESS  

SPORT EARBUDS 

HRS 5017

INTroDUCTIoN 

Thank you for purchasing the HRS 5017 Earbuds. In 

order to maximize your listening experience please 

read the following instructions.

earbuds, and away from any interference or 

obstructions

•  Clear any debris or wax buildup from the 

  earbuds and headphone nozzles

Earbuds don’t turn oN

•  Power ON the earbuds 

•  Charge the battery

Earbuds don’t pair with Bluetooth

®

 device

•  On your Bluetooth

®

 device: Turn the Bluetooth

®

 

feature ON and then OFF.  Delete HRS 5017 

earbuds from the Bluetooth

®

 list on your device. 

Pair again

•  Move your Bluetooth

®

 device closer to the 

  earbuds and away from any interference or  

obstructions

SpECIFICATIoNS

Bluetooth

®

 version:  v 5

Bluetooth

®

 profiles:  A2DP/AVRCP/HSP/HFP*

Wireless range: 

10m (32ft.)

Talk time: 

Approx. 7 hours**

Standby time: 

Approx. 175 hours**

Music play time: 

Approx. 7 hours**

Charging input: 

5.0V, 80mA

Charging time 

Approx. 2 hours

Driver diameter: 

10mm

Sensitivity: 

102±3dB

Impedance: 

16Ω

Frequence response:  20Hz-20kHz

*A2DP=Advanced Audio Distribution Profile, AVRCP=Audio Video 

Remote Control Profile, HSP=Handset Profile, HFP=Handsfree 

Profile.

**Approximate playback time, battery life depends on individual use 

and may be more or less than specified.

INDUSTry CANADA NoTICE rSS247

This device complies with Industry Canada license-exempt RSS 

standard(s). 

Operation is subject to the following two conditions:

(1) this device may not cause interference, and  

(2) this device must accept any interference, including interference 

that may cause undesired operation of the device.

This digital apparatus does not exceed the Class B limits for radio 

noise emissions from digital apparatus set out in the Radio  

Interference Regulations of Industry Canada.

IC Number: 255A-8077882

The Bluetooth

®

 word mark and logos are registered 

trademarks owned by Bluetooth

®

 SIG, Inc. and any use of 

such marks by The Source (Bell) Electronics Inc. is under 

license. Other trademarks and trade names are those of 

their respective owners.

1
2
3
4
5
6

LED indicator
- Decrease volume/previous track
+ Increase volume/next track
MFB (multi-function button)
Micro USB charging port
Microphone

Additional large and small ear tips 

included (medium tips installed on 

earbuds).

Summary of Contents for HRS 5017











Reviews: