HEALBE GOBE™
QUICK START GUIDE
Here are a few recommendations and helpful tips for getting started with
your Healbe GoBe. For more information, see the full manual at:
http://healbe.com/manual
http://healbe.com/faq
1. CHARGE YOUR GOBE
Charging time: About 30-50 min. Please make
sure that your GoBe is firmly installed in the
charger.
Battery life: Up to 2 days, depending on how
often you sync with the smartphone app. For
optimal battery life, we recommend syncing
3-5 times per day.
How to charge your GoBe: Place it in the
charger.
• If your GoBe is partly charged :
o Leave GoBe on and connect to the
charger.
o The display will read CHARGING
every 15 sec.
o When charging is finished, GoBe will
automatically turn off.
• If the battery is completely drained:
o Connect to the charger.
o Give one short push to the button on the
side of the sensor unit. The display will
read CHARGING.
Coming soon: Display % charged with one
short push of the button while charging. This
feature will be avalible in the next firmware
version.
2. TURN GOBE ON
Push the button on the side of the device and
hold for 2-3 seconds. The first time you turn
on your GoBe, you will need to pair it with
your smartphone and the Healbe GoBe™
App via Bluetooth. The default PINCODE is
000000 (six zeroes).
If you do not connect with the app within 5
min of powering up, GoBe will automatically
switch off.
It takes some time (10 sec – 2 min) for GoBe
to make a connection between the sensor and
your skin. To speed things up, apply some
moisture to the skin under the sensor. If GoBe
doesn’t make a connection within 5 min, it will
automatically switch off.
