background image

1/

12

Recess in Cavity 

as an add on  

to Music/ 

Performance  

Audio Infrastructure 

by Others  

1.

   Flexmike and Sharemike paired to  

 

Access Link inside SoundHouse

 

2.

   Output from AccessLink to Comms Box  

 

for Music / Performance Audio Infra- 

 

structure by Others.  If the length of  

 

cable from output of AccessLink to   

 

Comms Box is less than 10m, use    

 

general audio cable with 3.5mm male  

 

plug to connect to from Access Link to 

   Comms Box. If length of cable is    
 

greater than 10 metres, use CAT 5E/6  

 

cable with Audio Extenders at each  

 end.

 

3.

   Output from Comms Box to Input on 

 

ElectroBox inside SoundHouse. If the    

 

length of cable from output of Access Link 

 

to Comms Box is less than 10m, use    

 

general audio cable with 3.5mm male plug  

 

to connect to from Access Link to Comms  

 

Box. If length of cable is greater than 10m, 

 

use CAT 5E/6 cable with Audio Extenders 

 

at each end.

4

.  Depending on the size and configura 

 

tion of the space, a second Sound-   

 

House may be required.  Consult with  

 

Hear and Learn. 

UConnect SoundHouse by hearandlearn.com.au is a bespoke steel cabinet 

complete with internal electronics, power supplies, labelling and signage for 

capturing and delivering instructional audio in learning spaces.

There are two versions of the UConnect SoundHouse – our WALL MOUNTED 

version and our RECESSED version. This document is relevant to installing our

RECESSED version which have a right angled rear body for easy install complete 

with flange. It should not wall mounted.

5

.  Braille Tactile signs provided by Hear 

 

and Learn. These are compulsory and 

 

mounted to these rules: 

 

 Sign must be located not less than 

 

 1200 mm and not higher than 

 

 1600 mm above the floor or ground  

   surface 
 

 Located on wall on the latch side of   

 

  the door with the leading edge of 

 

  the sign located between 50 mm    

 

  and 300 mm from the architrave or  

 

  if this is not possible, the sign may 

 

  be placed on the door itself.

This configuration of SoundHouse includes our Access Link receiver.  Our Flexmike  

and Sharemike are paired to the Access Link pre installed in the SoundHouse.  These 

microphones are charged and stored in the SoundHouse for convenient usage.

Your RECESSED SoundHouse is equipped with HEARING AUGMENTATION facilities. This 

means forms of electronic Instructional Audio, PA, Screens – will be connected to the 

SoundHouse making it available to people in these spaces who have receivers built in their 

hearing aids.

See 

hearandlearn.com.au/hearing-augmentation-solutions

6.

   HearAssist includes local installation 

 

assistance, commissioning and staff  

 training.

7.

  Connection of power to GPO’s prebuilt 

 

into SoundHouse. No wall GPO(s) 

 required.

400mm required 

at mounting location 

to allow access

600mm 

required 

at mounting 

location  

to allow  

access

1000mm 

from floor

300mm

500mm

2

5

4

3

6

7

SOUNDHOUSE IS FOR EVERYDAY USE BY TEACHERS AND LEARNERS, BE UNOBSCURED, HAVE EASY ACCESS AND WITH LINE OF SIGHT OF AREAS OF THE ROOM.

hearandlearn.com.au

UConnect SoundHouse & Mini, 975 

Point to Pair,

 Redcat 

Point to Pair 

& Topcat 

Point to Pair 

are part of the 

Hear and Learn

 technology family.  

Offices Australia wide (03)93709355

1

Flexmike

Projector

TV

Comms 

Box

Second  

SoundHouse

Sharemike

25mm

74mm

Speaker cable help 

hearandlearn. com. au 

/install

Gym speakers

By Others

Summary of Contents for uconnect SoundHouse













Reviews: