background image

                                                                                                                             

Instruction Manual for HT023C LED Underwater Light 

 

 

 

 

Manufacturer: Hentech Technology Development Co., LTD 

Add:  Xinmin  Industrial  Zone,  Longzhou  Road,  Lunjiao  Town,  Shunde  District, 

Foshan City, Guangdong Province, China 528308 

Telephone: +86-757-27332335/27332338/27332339 

Fax: +86-757-27332330 

Website: http://www.hentech.ca 

 

                                                                                                                             

 

IMPORTANT: This manual includes essential information on the safety measures to be 

implemented for installation and start-up. Therefore, the installer, as well as the user, 

must read these instructions before beginning installation and start-up. 

 

Technical Specification 

Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC) 

Standard input watt:   

RGB / White   

5.5W / 6.3W (99 Normal LED) 

Use life: 60,000 hours 

16 programs with Synchronization capability 

 

Dimensions: 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for HT023C

Page 1: ...30 Website http www hentech ca IMPORTANT This manual includes essential information on the safety measures to be implemented for installation and start up Therefore the installer as well as the user must read these instructions before beginning installation and start up Technical Specification Standard input voltage 12V AC DC Range 12 18VAC or DC Standard input watt RGB White 5 5W 6 3W 99 Normal L...

Page 2: ...nts which have been inserted or handled at locations other than its own premises 16 Programs of RGB LED Bulbs 1 White sun white 2 Red one color red 3 Green one color green 4 Blue one color blue 5 Green blue fixed color green blue 6 Red green fixed color red green 7 Blue red fixed color blue red 8 Evening sea slow animation red blue 9 Evening rivers slow animation red green 10 Riviera slow animatio...

Page 3: ...ied to the lamp To replace unfasten the lamp from the bracket Ensure the new lamp is of the same model and characteristics as the one being replaced Start up The lamp should only operate underwater while secured to the vertical walls of the pool Never switch on the lamp if it is not underwater In case of colored lamps 16 pre programmed effects and combinations may be selected using the on off swit...

Page 4: ...arge of installation should have the required qualifications for this type of work Avoid making contact with the electric voltage Comply with the current standards regarding accident prevention IEC 364 7 702 standards must be observed WIRING IN BUILDINGS SPECIAL WIRING SWIMMING POOLS Replacement must be performed with the lamp disconnected from the electric power system Do not handle any electrica...

Reviews: