1
2
3
DLP-Link 3D Shutter Glasses
User
'
s Manual
Product Model: YDD3PGIP6
Product Overview
Package Content
*DLP-Link 3D shutter glasses x 1
*Cleaning Cloth x 1
*User's Guide x 1
*USB cable x 1
Product Feature
Trouble shooting
Thanks for choosing Hi-SHOCK brand high-end 3D glasses,
the 3D glasses in this package is applicable to 3D ready
projector or DLP 3D TV that applied DLP-Link 3D synchroni-
zation technology for watching 3D pictures, the 3D glasses
used advanced liquid crystal shutter technology and anti-
interference protocol technology, will take you into fantastic
3D experience trip.
*
USB charging port
You can charge the 3D glasses by connecting the mini USB port to
your computer or TV USB port to charge the 3D glasses.
*
Power Button
Turn ON: Press the button once;
Turn OFF: Hold the button for about 1.5 seconds.
* LED indicator
Power ON: The green light constant light about 1.5 seconds;
Power OFF: The green light blink three times;
Low Battery: The green light blink once per second, please charge
in time.
Charge: red light lights, charge fully the red light turn off
automatically.
*
Signal receiving window
In order to ensure better reception, when using the glasses please
face straight to the DLP emitter of projector or TV as far as possible,
and make sure that no object is in front of the emitter .
*
LCD lenses
High-speed response, High transmittance and High contrast LCD
lenses , when using and storing please prevent from being scratched,
abraded and shocked by force.
*
Earpieces
Adopt folded Earpieces design, convenient to store and carry.
Q1: What can I do if there is no 3D effect after I put on and turn
on the 3D glasses ?
Try this :
Please check if the DLP projector/ DLP TV setup is in 3D mode
or not.
Check the battery volume of your 3D glasses ,please charge it
in time if low in power.
Make sure your position is in the sync signal coverage so that
the glasses can receive the signal.
Q2: Why do the lenses blink when watching 3D films?
Try this:
1.Please charge the 3D glasses immediately if the battery is
seriously low.
If there is light or other signal interference in the watching
surroundings, please turn off interference source.
Operation Instructions:
Power ON: Press the power button once, LED indicator light up for
1.5 seconds that the power is on .
Power OFF: Constantly press the power button for 1.5 seconds, LED
indicatorblinks 3 times that power is OFF.
Low power warning: When power is low, LED indicator blinks once
per second that the 3D glasses need to be charged.
Kindly Reminder
3D glasses designed with auto operation and auto turn off function,
the 3Dglasses will start using these function under the following
status :
When you power on the 3D glasses , it will enter into standby mode
for 5 minutes .The 3D glasses will turn into working mode once
received the 3D sync signal during standby mode. Otherwise, the
3D glasses will automatic turn off if didn't received the 3D sync
signal under standby mode, and LCD lenses flashes 3 times when
turn off.
When 3D glasses being used, if projector or TV's 3D mode turn to 2D
mode, angle or distance changed result in 3D glasses could not
received 3D sync signal ,3D glasses will auto operate 5 seconds ,and
the 3D glasses will worknormally once received 3D sync signal within
5 seconds, otherwise, the 3Dglasses will enter into standby mode
once didn't received 3D sync signal within 5 seconds.
IR Receiver
LCD Lenses
USB charging port
LED indicator
Power Button
Earpieces
