background image

The TPS-CP80 clamping system is designed for 

towers and support structures that utilize ROUND 

tubing. Oval tubing and flat structures will not 

work with this clamp. The TPS-CP80 clamp can 

be used with tube diameters from 1.5” up to 

2.75”. Included are separate bushing sets for all 

tube sizes at 1/8” increments. Refer to the table 

below to determine your configuration.

 

Choose a suitable 

mounting location

Mounting Location

Dimensions

CAUTION

Always consider consulting a professional audio installer 

before installing new speakers. Many manufacturers locate 

speakers behind interior panels that require special tools to 

remove. Be careful and take your time.  

If you are using the speaker wire supplied with your new 

speakers make sure that you run the speaker wires only 

through safe areas. Do not let speaker wire make contact with 

metal edges or hot engine components.

Congratulations on your choice of a Hifonics speaker. 

This “Quick Start” Installation guide is meant to help 

you complete a basic installation. For more detailed 

information on system setting, speaker and subwoofer 

configuration, and full specifications by model, visit our 

website at hifonics.com

It’s a good idea to confirm that you have purchased the 

correct size speakers to fit your application. If you have any 

reservations about being able to complete the installation 

yourself, we recommend contacting a professional.

Before you start

Carefully select a route for the audio signal 

wires. If using existing speaker wires, confirm 

that the wire is in good shape and not 

shorted. In the case of an illuminated model, 

route a positive and negative wire from a 

sw12V source. Avoid routing wires 

through dangerous areas. Attach the positive 

illumination lead to either of the BLUE or the 

RED termination point.

 

Route signal and 

illumination wires

Wiring

230mm

9.04”

104mm

4.08”

44mm

1.73”

274mm

10.78”

215mm

8.47”

Tube 

Diameter

Tube 

Circumference

Clamp

Top 

Bushing

Bottom 

Bushing

1.5

4.71

A

1.50

1.50

1.625

5.10

A

1.63

1.63

1.75

5.50

A

1.75

1.75

1.875

5.89

A

none

1.88

2

6.28

B

2.00

2.00

2.125

6.68

B

2.13

2.13

2.25

7.07

B

2.25

2.25

2.375

7.46

B

2.38

2.38

2.5

7.85

B

2.50

2.50

2.625

8.25

B

2.68

2.68

2.75

8.64

B

none

none

Black  ...................................... Audio signal negative

Black w/white stripe ................ Audio signal positive

Black ....................................... Illumination negative

Red ......................................... Illumination positive

Reviews: