Gigabit Ethernet
Progressive Scan CCD Camera
KP-F83GV
Specifications
(Preliminary) Ver2.4
1. General
The KP-F83GV is single CCD type camera which utilized the progressive scan CCD image
sensor with square pixel for XGA format of 1/3-inch.
By adoption of a Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can
be possible. Moreover, by using hub or switcher, construction of multiple camera system can
be easily performed.
2. Principal features
1) High resolution
The 1/3-inch 800,000 pixels square lattice progressive scan CCD achieve a high resolution
of 1024(H) x 768(V) (XGA).
2) Gigabit Ethernet interface
High-speed serial interface Gigabit Ethernet supported and direct connection is possible to
PC by the diameter cable of thin as compared with parallel output. Cable length can be
extended to maximum 100m without hub and switcher.
3) GigE Vision correspondence
Based on industrial camera interface standard GigE Vision, a maximum of 1 Gbps high
speed data transmit is available and suitable for image processing.
4) CCD drive functions
Auto electronic Shutter mode (AES)
Adjusted automatically from 10 second to approx. 1/100,000 second.
Variable electronic shutter mode
Variable at 1H steps from 10 second to approx. 1/100,000 second.
5) External trigger
An external trigger signal input can be used to capture an image at desired timing for instant
view or processing. The software trigger via a Gigabit Ethernet cable and the hardware
trigger can deal with all trigger signals.
Summary of Contents for KP-F83GV
Page 4: ... φ ...
