3
2
Table of Contents
Introduction
Congratulations on your purchase of the Aggressor FM pistol grip radio system.
The Aggressor FM is loaded with many great features to maximum your R/C experience.
Please read this manual carefully to familiarize yourself with the operation of your new Aggressor.
After reading this manual, store it in a safe place for future reference.
- Ergonomically designed 3-Channel Pistol Grip FM Radio
- Servo Reversing (Channels 1 & 2)
- End Pont Adjustments (EPA) for Steering and Throttle
- Dual Rate Steering (Adjustable on the fly)
- 3rd Channel push button for shifting
- 3 L.E.D. Battery status indicators
- Audible power indicator
- Removable crystals for easy channel changing (If this is legal in your Country)
- Interchangeable rubber grip pads to fit all hand sizes
- Assorted colored grip pads and tuning covers for personalizing your radio
- Foam steering wheel for comfortable control
- Charging Jack for optional rechargeable batteries
- 3-CH FM micro receiver
- Standard HS-325HB servo
- Receiver dry battery holder
System Features
AGGRESSOR
AGGRESSOR
3
5
4
6
7
8
1.
System Specifications
a. Transmitter
b. Receiver
c. Servo
d. Accessories
e. Options
2.
Transmitter Functions and Operations
a. Power Switch
b. Battery Indicator LED's
c. Steering Dual Rate
d. 3rd Channel Push Button
e. Steering and Throttle trims
f. Tuning Cover
g. End Point Adjustments (EPA
h. Servo Reversing switches
i. Battery Cover
j. Antenna
k. Grip Pad
l. Crystal
m. Charging Jack
n. Steering Wheel
o.Throttle Trigger
3.
Transmitter Battery Installation
4.
Recharging Batteries
5.
Receiver and Servo Connections
a. Receiver
b. Servos
c. Battery
6.
Troubleshooting Guide
7.
Warnings
8.
Racers Tips
page
page
page
page
page
page
Product Service Information ( for USA & Canada only )
In the event you would require service to your radios, please send the parts to :
Hitec RCD USA, Inc. Service Department
12115 Paine St.
Poway, CA 92064
Please include your name address and telephone number along
with a brief description of the failure or the work that you are requesting to be done.
A) Transmitter:
- Current drain 180mA
- Modulation: FM
- Power supply: 8AA alkaline, Nicad or NiMh batteries
- Frequencies: 27mhz (6 channels), 75mhz (30 channels)
B) Receiver:
- HFS-03MM
- Modulations: FM
- Power Supply: 4.8V- 6V
- Weight: 0.6oz
- Size: 1.5 x 1.0 x 0.6"
- Current drain: 30mA +/- 0.3mA
D) Accessories:
- "Brake Pad" This small piece of foam can be attached to the brake lever on the
trigger to take up any space between your finger and the lever for a custom fit.
E) Options:
- Red, Blue and Black colored grip pads in large and small sizes (Sold separately).
- Tuning covers available in Red, Blue and Clear, as well as custom designs in
Silver Carbon and Camouflage (Sold separately).
C) Servo:
- HS-325HB
- Voltage range: 4.8 - 6V
- Speed: 0.15sec/60 degree (6V)
- Torque: 51in/oz (6V)
- Weight: 1.5oz
- Size: 1.6" x 0.8" x 1.4"
1.
System Specifications
Summary of Contents for Aggressor FM
Page 3: ......
